{"id":2250,"date":"2020-01-08T11:25:04","date_gmt":"2020-01-08T11:25:04","guid":{"rendered":"https:\/\/35.94.173.37\/blog\/?p=2250"},"modified":"2024-11-04T11:29:31","modified_gmt":"2024-11-04T11:29:31","slug":"using-nis-pxi-hardware-to-control-the-worlds-largest-particle-accelerator","status":"publish","type":"post","link":"https:\/\/www.apexwaves.com\/blog\/using-nis-pxi-hardware-to-control-the-worlds-largest-particle-accelerator\/","title":{"rendered":"Using NI\u2019s PXI Hardware to Control the World\u2019s Largest Particle Accelerator"},"content":{"rendered":"

Particle Accelerators<\/strong>\u00a0are used in complex research that reveals much of what we know about basic matter in our universe. A particle accelerator is an enclosed machine that accelerates\u00a0elementary particles<\/strong>\u00a0(electrons and protons) to fast speeds and energy levels. After the beam is moving quickly, targets are positioned in the path of the beam, as well as measurement devices, to observe and record information about how the beam and the target respond upon collision.<\/p>\n

 <\/p>\n

The design and function of particle accelerators is extremely complex, some more than others. On September 10, 2008, The\u00a0European Organization for Nuclear Research<\/a>\u00a0(CERN) began using the world\u2019s largest particle accelerator. When they needed precise, reliable, and cost-effective electronic control and measurement solutions, they turned to Houston, TX-based\u00a0National Instruments<\/strong>\u00a0for help.<\/p>\n

The CERN Large Hadron Collider<\/strong><\/h1>\n

The\u00a0Large Hadron Collider<\/a>\u00a0(LHC) is a huge circular particle accelerator that measures 27 kilometers in circumference and can send beams of light in opposite directions to cause collisions at almost light speed (the speed of light is 186,282 miles per second). At this speed, a traveler could circumnavigate the Earth\u00a07.5 times<\/strong>\u00a0in a single second of time.<\/p>\n

To achieve the monumentally challenging tasks of stabilizing such a monstrous machine, it is buried\u00a0150 meters<\/strong>\u00a0underground. Riddled with\u00a0superconducting magnets<\/strong>\u00a0that produce the needed acceleration and due to such extraordinary particle beam speeds, extreme care must be exercised to prevent the beams from veering off-course and literally destroying the LHC itself.<\/p>\n

CERN<\/strong>\u00a0is the largest particle physics laboratory in the world. It began work in 1954 and is located just on the border between Switzerland and France. CERN operates a number of particle accelerators to conduct research concerning the basic and most complex questions about our world and beyond. This data is then shared with researchers and scientists from all over the world.<\/p>\n

The Role of National Instruments Solutions<\/strong><\/h1>\n

As mentioned above, the incredibly high speeds of the particle beams within the LHC can cause\u00a0catastrophic damage<\/strong>\u00a0if they veer off course in even the slightest degree. To prevent this from happening, engineers at CERN installed over 100 collimators containing heavy substances like graphite to absorb stray energy particles from the beams.<\/p>\n

Each of these collimators require a reconfigurable\u00a0I\/O electronic control module<\/strong>\u00a0from National Instruments, mounted in a\u00a0National Instruments PXI chassis<\/a>. Each collimator is also connected to a second NI control module in a separate PXI chassis to check for accuracy. In the working configuration, each\u00a0PXI chassis<\/strong>\u00a0controls three collimators while another PXI chassis checks their positioning in real-time. More collimators and PXI chassis with the necessary control modules are being added in Phase II, which will bring the sum of complete PXI-based control systems to 200.<\/p>\n

\"\"<\/p>\n

In addition, each collimator runs on\u00a0NI LabVIEW Real-Time<\/a>, while the I\/O modules run on LabVIEW FPGA for increased control and reliability. The off-the-shelf, plug-and-play compatibility of NI software and hardware makes deployment, replacement, and any reconfigurations fast and easy for CERN engineers. In fact, the ease of use, small size, better cost, and overall reliability of\u00a0NI products<\/strong>\u00a0are why they were chosen for this incredibly complex application.<\/p>\n

Robert Losito from CERN, said, \u201cTo meet strict timing, accuracy, and reliability requirements, we chose a\u00a0motion control and feedback system<\/strong>\u00a0based on reconfigurable I\/O and\u00a0LabVIEW FPGA<\/strong>. We selected a design platform that incorporated only the features we needed without adding unnecessary cost and helped us avoid creating our own software drivers to reduce the manpower required to complete the system.\u201d<\/p>\n

He went on to say, \u201cWe selected the LabVIEW and PXI solution for the deployment platform due to the small size, ruggedness, and cost savings over the traditional VME and programmable logic controller-based model.\u201d<\/p>\n

Browse National Instruments\u00a0PXI Products<\/a>\u00a0that are In Stock at Apex Waves!<\/strong><\/p>\n

\"\"<\/p>\n

More information about how National Instruments is contributing to particle accelerator-based research can be found by exploring the following resources:<\/p>\n