PCIe-6341
Modular Systems > National Instruments > X Series
| Description: | PCIe-6341, 16-Bit, 16 AI, Multifunction I/O Device |
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments PCIe-6341 Multifunction I/O Device
The PCIe-6341 (Part number: 781046-01, 194986E-03L) is an X Series Multifunction Device by National Instruments. This model has dimensions of 3.9 inches × 6.6 inches and weighs around 3.6 oz. The PCIe 6341 has one 68-pin VHDCI I/O connector. This model is structured with a Standard ATX peripheral disk drive power connector. The NI PCIe-6341 comes with a self-calibration feature. Approximately 15 minutes of warming up is needed before calibrating the device.
This device has a maximum operational voltage range of 11 V for Measurement Category I. The device has an operational shock of 30 g by a half sine wave with 11 ms pulse. The PCIe-6341 X Series device is tested according to the IEC 60068-2-27 standards. The NI PCIe-6341 has the operational random vibration of about 5 Hz to 500 Hz with 0.3 grms. It has the same vibration range in the non-operating mode with 2.4grms. The device has an RH operating humidity range between 10 to 90%. The PCIe-6341 X Series model has an RH storage humidity range between 5 to 95%. The NI PCIe-6341 can be operated at the maximum height of 2000 meters. This device is suitable for indoor purposes only.
The National Instruments PCIe 6341 has 16 analog input single-ended channels, along with 8 differential channels. Each channel has a sampling rate of 500 kS/s. This Multifunction I/O Device has 16-bit ADC resolution. The timing resolution is about 10 ns. The NI PCIe-6341 fulfills the safety standards for electrical equipment. These standards are compulsory to follow for control, measurement, and lab use.
Associated Part Numbers: 194986-03L, 194986B-03L, 194986E-03L, 781046-01
| Model | PCIe-6341 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 781046-01, 194986E-03L |
| Series | X Series |
| Type | Multifunction I/O Device |
| Analog Input Channels | 16 (16-Bit, 500 kS/s) or 08 differential |
| Analog Output Channels | 2 (16-Bit, 900 kS/s) |
| Digital Inputs | 16 |
| Digital Outputs | 8 |
| Timing I/O | 4 Counter/Timer I/O (32 bits, 100 MHz) |
| Frequency Generator Channels | 1 |
| Phase-Locked Loop (PLL) | 1 |
| I/O Connector | 1 68-pin VHDCI |
| Power Requirements | +3.3 V, +12 V -- 1A, 1.4 W, 8.6 W |
| Dimensions | 3.9 in. × 6.6 in. |
| Weight | 0.23 lb. |
| Driver Software | NI-DAQmx 9.0 |
| Warranty | Three Year Warranty |
| PCIe-6341 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCIe-6341 Frequently Asked Questions
Question: Can I buy a low-profile bracket for my PCIe-6341 X Series Device?
Answer: The PCIe-6341 X Series Device does not fit a low-profile bracket.
Question: Which driver is used with the NI PCIe-6341?
Answer: The NI PCIe-6341 is compatible with the NI-DAQmx driver.
Question: My PCIe 6341 NI is running slow when I do an “inputSingleScan” command. What can I do?
Answer: Check your driver and ensure that it’s the latest version. If you’re still having problems with the PCIe 6341 NI, contact the driver manufacturer for support.
PCIe-6341 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68 NOTE TO USERS.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68A NOTE TO USERS.PDF
NI PCIE 6320 21 23 41 43 LETTER OF VOLATILITY.PDF
NI PXIE 6341 LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PCIe-6341
PCIe-6341, 16-Bit, 16 AI, Multifunction I/O Device
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PCIe-6341 Multifunction I/O Device
The PCIe-6341 (Part number: 781046-01, 194986E-03L) is an X Series Multifunction Device by National Instruments. This model has dimensions of 3.9 inches × 6.6 inches and weighs around 3.6 oz. The PCIe 6341 has one 68-pin VHDCI I/O connector. This model is structured with a Standard ATX peripheral disk drive power connector. The NI PCIe-6341 comes with a self-calibration feature. Approximately 15 minutes of warming up is needed before calibrating the device.
This device has a maximum operational voltage range of 11 V for Measurement Category I. The device has an operational shock of 30 g by a half sine wave with 11 ms pulse. The PCIe-6341 X Series device is tested according to the IEC 60068-2-27 standards. The NI PCIe-6341 has the operational random vibration of about 5 Hz to 500 Hz with 0.3 grms. It has the same vibration range in the non-operating mode with 2.4grms. The device has an RH operating humidity range between 10 to 90%. The PCIe-6341 X Series model has an RH storage humidity range between 5 to 95%. The NI PCIe-6341 can be operated at the maximum height of 2000 meters. This device is suitable for indoor purposes only.
The National Instruments PCIe 6341 has 16 analog input single-ended channels, along with 8 differential channels. Each channel has a sampling rate of 500 kS/s. This Multifunction I/O Device has 16-bit ADC resolution. The timing resolution is about 10 ns. The NI PCIe-6341 fulfills the safety standards for electrical equipment. These standards are compulsory to follow for control, measurement, and lab use.
| Model | PCIe-6341 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 781046-01, 194986E-03L |
| Series | X Series |
| Type | Multifunction I/O Device |
| Analog Input Channels | 16 (16-Bit, 500 kS/s) or 08 differential |
| Analog Output Channels | 2 (16-Bit, 900 kS/s) |
| Digital Inputs | 16 |
| Digital Outputs | 8 |
| Timing I/O | 4 Counter/Timer I/O (32 bits, 100 MHz) |
| Frequency Generator Channels | 1 |
| Phase-Locked Loop (PLL) | 1 |
| I/O Connector | 1 68-pin VHDCI |
| Power Requirements | +3.3 V, +12 V -- 1A, 1.4 W, 8.6 W |
| Dimensions | 3.9 in. × 6.6 in. |
| Weight | 0.23 lb. |
| Driver Software | NI-DAQmx 9.0 |
| Warranty | Three Year Warranty |
| PCIe-6341 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCIe-6341 Frequently Asked Questions
Question: Can I buy a low-profile bracket for my PCIe-6341 X Series Device?
Answer: The PCIe-6341 X Series Device does not fit a low-profile bracket.
Question: Which driver is used with the NI PCIe-6341?
Answer: The NI PCIe-6341 is compatible with the NI-DAQmx driver.
Question: My PCIe 6341 NI is running slow when I do an “inputSingleScan” command. What can I do?
Answer: Check your driver and ensure that it’s the latest version. If you’re still having problems with the PCIe 6341 NI, contact the driver manufacturer for support.
PCIe-6341 PDF Manuals & Diagrams
PCIe-6341 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68 NOTE TO USERS.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68A NOTE TO USERS.PDF
NI PCIE 6320 21 23 41 43 LETTER OF VOLATILITY.PDF
NI PXIE 6341 LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
