USB-6343
Modular Systems > National Instruments > X Series
| Description: | USB-6343, 32 AI, 4 AO, 48 DIO, USB Multifunction I/O Device |
(expedited shipping options available)
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments USB-6343 Multifunction I/O Device
The NI USB-6343 (Part Numbers: 781439-01, 782253-01, 782252-01, and 150199C-01L) is a Multifunction I/O Device from the X Series. This device has 16 differential or 32 single-ended analog input channels. Part number 781439-01 has screw terminal front connectors, while part number 782253-01 has BNC front connectors. Part number 782252-01 is for the USB-6343 Board Only Kit. All the analog input channels are protected against an overvoltage condition. This device also provides protection to all sense channels. The amount of this overvoltage protection is ±25 V when this device is powered on. This amount is ±15 V when this device is in the off mode. These values are sufficient for a maximum of two AI pins.
The NI USB-6343 DAQ also has four analog output channels with 16 bits DAC resolution, and a maximum sample rate of 500 kS/s. While the input channels convert analog signals to digital signals, the output channels convert the digital signals to analog signals. The value of differential non-linearity for the output channels is ±1 LSB. The NI USB 6343 X Series DAQ offers a guaranteed monotonicity. This device provides 16-bits resolution measurements for monotonicity. It is equipped with 128 screw terminals or 30 BNCS and 60 screw terminal I/O connectors.
The USB 6343 NI offers simultaneous update rates. The maximum update rate for one channel is 900 kS/s. The rate for two channels is 840 kS/s. The rate for three channels is 775 kS/s. Finally, the rate for four channels is 719 kS/s. These update rates are simultaneous rates. The timing accuracy for these output channels is 50 ppm. This accuracy is measured as the ppm of sample rates. The output channels of this device provide a timing resolution of 10 ns. The output range of this impressive device is ±10 Volts. The USB X Series 6343 provides DC output coupling. The device has a recommended operating temperature range of 0 °C to 45 °C, and a storage temperature range of -40 °C to 70 °C. It has a recommended warm-up time of 15 minutes, and should be calibrated at least once every 2 years.
The screw terminal fitted model weighs 3 oz, and measures 10.4 x 6.8 x 1.4 in. in physical dimensions while the BNC model has a weight of 6 oz, with the physical dimensions: 8.0 x 7.3 x 2.7 in.
Associated Part Numbers: 150199-01L, 150199A-01L, 150199C-01L, 781439-01, 782252-01, 782253-01
| Model | USB-6343 |
|---|---|
| Manufacturer | National Instruments |
| Part Numbers | 781439-01, 782253-01, 782252-01, 150199C-01L |
| Type | Multifunction I/O Device |
| Analog Input Channels | 32 single-ended or 16 differential |
| Analog Output Channels | 4 |
| Maximum Sample Rate | 500 kS/s |
| Dimensions | Screw Terminal: 10.4 × 6.8 × 1.4 in. BNC: 8.0 × 7.3 × 2.7 in. |
| Weight | Screw Terminal: 3 lb 3 oz. BNC: 3 lb 15.6 oz. |
| Warranty | Three Year Warranty |
| USB-6343 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments USB-6343 Frequently Asked Questions
Question: What is the difference between the two part numbers for the NI USB-6343?
Answer: The first part number for the NI USB-6343, 781439-01, has screw terminal front connectors. The second part number, 782253-01, has BNC front connectors.
Question: How many bidirectional digital channels does the NI USB 6343 X Series DAQ have?
Answer: The NI USB 6343 X Series DAQ has 48 bidirectional digital channels.
Question: How many I/O connectors does the USB 6343 NI have?
Answer: The USB 6343 NI screw terminal version has 128 screw terminals, while the BNC version has 30 BNCs and 60 screw terminals.
Question: What are the power supply requirements for the USB X Series 6343?
Answer: The power supply requirements for the USB X Series 6343 are 11 to 30 VDC, 30 W, 2 positions 3.5 mm pitch pluggable screw terminal with screw locks.
USB-6343 PDF Manuals
DAQ GETTING STARTED GUIDE FOR EXTERNALLY POWERED USB.PDF
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
DAQ MULTIFUNCTION I O MIO AND SIMULTANEOUS MULTIFUNCTION I O SMIO DEVICES CALIBRATION PROCEDURE.PDF
FERRITE INSTALLATION NOTE TO USERS.PDF
GUIDE D_INITIATION DAQ POUR LES PC3A9RIPHC3A9RIQUES USB C3A0 ALIMENTATION EXTERNE.PDF
GUIDE D_INITIATION DAQ POUR PCI PCI EXPRESS.PDF
LOCKING LID FOR USB SCREW TERMINAL DEVICES USER GUIDE.PDF
MULTIFUNCTION IO PRODUCT FLYER.PDF
USB 6341 43 51 53 61 63 LETTER OF VOLATILITY.PDF
USB 634X 635X 636X OEM USER GUIDE.PDF
USB X SERIES MOUNTING KIT INSTALLATION GUIDE.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
USB-6343
USB-6343, 32 AI, 4 AO, 48 DIO, USB Multifunction I/O Device
(expedited shipping options available)
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments USB-6343 Multifunction I/O Device
The NI USB-6343 (Part Numbers: 781439-01, 782253-01, 782252-01, and 150199C-01L) is a Multifunction I/O Device from the X Series. This device has 16 differential or 32 single-ended analog input channels. Part number 781439-01 has screw terminal front connectors, while part number 782253-01 has BNC front connectors. Part number 782252-01 is for the USB-6343 Board Only Kit. All the analog input channels are protected against an overvoltage condition. This device also provides protection to all sense channels. The amount of this overvoltage protection is ±25 V when this device is powered on. This amount is ±15 V when this device is in the off mode. These values are sufficient for a maximum of two AI pins.
The NI USB-6343 DAQ also has four analog output channels with 16 bits DAC resolution, and a maximum sample rate of 500 kS/s. While the input channels convert analog signals to digital signals, the output channels convert the digital signals to analog signals. The value of differential non-linearity for the output channels is ±1 LSB. The NI USB 6343 X Series DAQ offers a guaranteed monotonicity. This device provides 16-bits resolution measurements for monotonicity. It is equipped with 128 screw terminals or 30 BNCS and 60 screw terminal I/O connectors.
The USB 6343 NI offers simultaneous update rates. The maximum update rate for one channel is 900 kS/s. The rate for two channels is 840 kS/s. The rate for three channels is 775 kS/s. Finally, the rate for four channels is 719 kS/s. These update rates are simultaneous rates. The timing accuracy for these output channels is 50 ppm. This accuracy is measured as the ppm of sample rates. The output channels of this device provide a timing resolution of 10 ns. The output range of this impressive device is ±10 Volts. The USB X Series 6343 provides DC output coupling. The device has a recommended operating temperature range of 0 °C to 45 °C, and a storage temperature range of -40 °C to 70 °C. It has a recommended warm-up time of 15 minutes, and should be calibrated at least once every 2 years.
The screw terminal fitted model weighs 3 oz, and measures 10.4 x 6.8 x 1.4 in. in physical dimensions while the BNC model has a weight of 6 oz, with the physical dimensions: 8.0 x 7.3 x 2.7 in.
| Model | USB-6343 |
|---|---|
| Manufacturer | National Instruments |
| Part Numbers | 781439-01, 782253-01, 782252-01, 150199C-01L |
| Type | Multifunction I/O Device |
| Analog Input Channels | 32 single-ended or 16 differential |
| Analog Output Channels | 4 |
| Maximum Sample Rate | 500 kS/s |
| Dimensions | Screw Terminal: 10.4 × 6.8 × 1.4 in. BNC: 8.0 × 7.3 × 2.7 in. |
| Weight | Screw Terminal: 3 lb 3 oz. BNC: 3 lb 15.6 oz. |
| Warranty | Three Year Warranty |
| USB-6343 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments USB-6343 Frequently Asked Questions
Question: What is the difference between the two part numbers for the NI USB-6343?
Answer: The first part number for the NI USB-6343, 781439-01, has screw terminal front connectors. The second part number, 782253-01, has BNC front connectors.
Question: How many bidirectional digital channels does the NI USB 6343 X Series DAQ have?
Answer: The NI USB 6343 X Series DAQ has 48 bidirectional digital channels.
Question: How many I/O connectors does the USB 6343 NI have?
Answer: The USB 6343 NI screw terminal version has 128 screw terminals, while the BNC version has 30 BNCs and 60 screw terminals.
Question: What are the power supply requirements for the USB X Series 6343?
Answer: The power supply requirements for the USB X Series 6343 are 11 to 30 VDC, 30 W, 2 positions 3.5 mm pitch pluggable screw terminal with screw locks.
USB-6343 PDF Manuals & Diagrams
USB-6343 PDF Manuals
DAQ GETTING STARTED GUIDE FOR EXTERNALLY POWERED USB.PDF
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
DAQ MULTIFUNCTION I O MIO AND SIMULTANEOUS MULTIFUNCTION I O SMIO DEVICES CALIBRATION PROCEDURE.PDF
FERRITE INSTALLATION NOTE TO USERS.PDF
GUIDE D_INITIATION DAQ POUR LES PC3A9RIPHC3A9RIQUES USB C3A0 ALIMENTATION EXTERNE.PDF
GUIDE D_INITIATION DAQ POUR PCI PCI EXPRESS.PDF
LOCKING LID FOR USB SCREW TERMINAL DEVICES USER GUIDE.PDF
MULTIFUNCTION IO PRODUCT FLYER.PDF
USB 6341 43 51 53 61 63 LETTER OF VOLATILITY.PDF
USB 634X 635X 636X OEM USER GUIDE.PDF
USB X SERIES MOUNTING KIT INSTALLATION GUIDE.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
