National Instruments AT-5102 Digitizer

The AT-5102 (Part Number: 777252-01) is an 8-bit digitizer. The manufacturer of the AT-5102 is National Instruments. The AT-5102 is a dual-channel digitizer with a sampling rate of 20 MS/s. The AT-5102 Digitizer is designed for the ISA bus. The NI AT-5102 can be used with NI-SCOPE driver software for configuration. The AT-5102 can be operated in software such as LabVIEW, Measurement Studio, and LabWindows/CVI. The Windows 2000/NT/XP operating systems are supported by the AT-5102 Digitizer.

The NI AT-5102 is specially designed for the rapid performance of automated systems. The AT-5102 provides high speed for data acquisition systems. The AT-5102 is featured with two analog channels with advanced properties. The bandwidth of an individual analog input channel is 15 MHz. A lower voltage level can be obtained through attenuation selector software. The voltage range can be varied from ±50 mV up to ±5 V. The signal measurement capabilities of the AT-5102 can also be enhanced with software-selectable AC or DC coupling techniques. The AT-5102 additionally contains two BNC connectors for analog input channels.

The NI AT-5102 utilizes an analog-to-digital converter. This Digitizer uses the 8-bit resolution and 20 MS/s sampling rate to digitize input signals. The sampling rate can be extended to different levels. The real time sampling rate of the AT-5102 varies from 20 MS/s to 1 kS/s. The random-interleaved sampling (RIS) technique is used to extend the significant sampling rate to the 1 GS/s level. The AT-5102 has a detained memory of 663,000 samples.

Associated Part Numbers: 777252-01