PXIe-5105
Oscilloscopes > National Instruments > Oscilloscopes
Description: | PXIe-5105, 60 MHz, 8-Channel, PXI Oscilloscope |
Need an Official Quote?
Or speak to a sales representative for additional information:
National Instruments PXIe-5105 PXI Oscilloscope
The National Instruments PXIe-5105 (Part Numbers: 783590-01, 783590-02, 783590-03) High-Resolution Digitizer highlights eight 60 MS/s simultaneously tested voltage input channels with 12-bit resolution, 60 MHz bandwidth capacity, and up to 512 MB of memory in a smaller, 3U PXI/PXI Express, or PCI gadget. The NI PXIe-5105 uses the National Instruments Synchronization and Memory Core (SMC) engineering, so the user can join numerous gadgets to develop 136 phase-coherent channels in a single NI PXI chassis. The user can also synchronize the PXIe 5105 with other analog and digital instruments to make mixed signal test frameworks.
The NI PXIe 5105 Digitizer is perfect for an extensive variety of uses, including: ultrasonic nondestructive test (NDT), medical imaging, scientific research, military/aviation, and consumer electronics.
The NI device is run using the NI-SCOPE driver software, which is compatible with software packages/application development environments (ADEs) such as LabVIEW, LabWindows/CVI, Measurement Studio, Microsoft Visual C/C++, and .NET (C# and VB.NET). The device hardware can be configured using the Measurement & Automation Explorer (MAX) tool. It has a recommended warm-up time of 15 minutes and should be calibrated at least once every two years.
For time and frequency analysis, this Oscilloscope offers:
• 60 MHz input transmission capacity with anti-alias and noise filters
• 72 dBc spurious free dynamic range (SFDR), Eight 60 MS per second, and 12-Bit Input Channels
• Independent channel-selectable 50 mVpp to 30 Vpp input
• Independent channel-selectable 50 Ω or 1 Mω input impedance
• 2-year alignment interim and 0 to 55 ° C working temperature and a deep onboard memory
• 16, 128, or 512 MB of locally available memory
• Capture in excess of 1 million triggered waveforms in various record mode, with equipment trigger rearming
• Stream information persistently from installed memory to host memory or disk.
The NI device has a recommended operating temperature range of 0 °C to 55 °C, and a storage temperature range of -40 °C to 71 °C. It weighs 18.3 oz, and measures 8.43 x 0.8 x 5.1 in. in physical dimensions. The PXIe-5105 is equipped with 2 SMB jack front connectors, has a total power requirement of 23 W.
The PXIe-5105 is available to be calibrated. While the recommended calibration period for individual parts varies, most parts should be calibrated either annually or every two years to ensure accuracy. If you need the PXIe-5105 calibrated, Apex Waves provides options. We offer high-quality NIST accredited calibrations through a 3rd party, with an average turnaround time of 1 to 2 weeks. When you order the PXIe-5105 with us, you can request basic (unaccredited) in-house calibration that will calibrate the part to the manufacturer specifications prior to being shipped. Call or email us today for more information about calibrating the PXIe-5105!
Associated Part Numbers: 783590-01, 783590-02, 783590-03
Model | PXIe-5105 |
---|---|
Part Numbers | 783590-01, 783590-02, 783590-03 |
Manufacturer | National Instruments |
Type | PXI Oscilloscope |
Maximum Bandwidth | 60 MHz |
Voltage Input Channels | 8 |
Maximum Sample Rate | 60 MS/s |
Dimensions | 8.43 x 0.8 x 5.1 in. |
Weight | 18.3 oz. |
Warranty | Three Year Warranty |
PXIe-5105 Manual | User Manual and Maintenance Manual Available for Download |
Price | Contact a sales representative for a quote. |
National Instruments PXIe-5105 Frequently Asked Questions
Question: Why are there three part numbers for the PXIe-5105?
Answer: The PXIe-5105 has three onboard memory size options: part number 783590-01 with 16 MB onboard memory, part number 783590-02 with 128 MB onboard memory, and part number 783590-03 with 512 MB onboard memory.
Question: What is the analog input resolution for the NI PXIe-5105?
Answer: The analog input resolution for the NI PXIe-5105 is 12 bits.
Question: What is the total power for the PXIe-5105?
Answer: The total power for the PXIe-5105 is 23 W.
Question: What type of front-panel connectors are on the NI PXIe-5105?
Answer: The NI PXIe-5105 has SMB jack connectors on the front panel.
PXIe-5105 PDF Manuals
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI PXI PXIE PCI 5105 CALIBRATION PROCEDURE.PDF
NI PXI PXIE PCI 5105 GETTING STARTED GUIDE.PDF
OSCILLOSCOPE PROBE COMPENSATOR USER GUIDE.PDF
PCI PXI PXIE 5105 LETTER OF VOLATILITY.PDF
Driver Downloads for PXIe-5105
OS Compatibility:
Win XP 32-bit, Win 7 32-bit, Win 10 32-bit
Why Buy From Apex Waves:
PXIe-5105
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
- Drivers
National Instruments PXIe-5105 PXI Oscilloscope
The National Instruments PXIe-5105 (Part Numbers: 783590-01, 783590-02, 783590-03) High-Resolution Digitizer highlights eight 60 MS/s simultaneously tested voltage input channels with 12-bit resolution, 60 MHz bandwidth capacity, and up to 512 MB of memory in a smaller, 3U PXI/PXI Express, or PCI gadget. The NI PXIe-5105 uses the National Instruments Synchronization and Memory Core (SMC) engineering, so the user can join numerous gadgets to develop 136 phase-coherent channels in a single NI PXI chassis. The user can also synchronize the PXIe 5105 with other analog and digital instruments to make mixed signal test frameworks.
The NI PXIe 5105 Digitizer is perfect for an extensive variety of uses, including: ultrasonic nondestructive test (NDT), medical imaging, scientific research, military/aviation, and consumer electronics.
The NI device is run using the NI-SCOPE driver software, which is compatible with software packages/application development environments (ADEs) such as LabVIEW, LabWindows/CVI, Measurement Studio, Microsoft Visual C/C++, and .NET (C# and VB.NET). The device hardware can be configured using the Measurement & Automation Explorer (MAX) tool. It has a recommended warm-up time of 15 minutes and should be calibrated at least once every two years.
For time and frequency analysis, this Oscilloscope offers:
• 60 MHz input transmission capacity with anti-alias and noise filters
• 72 dBc spurious free dynamic range (SFDR), Eight 60 MS per second, and 12-Bit Input Channels
• Independent channel-selectable 50 mVpp to 30 Vpp input
• Independent channel-selectable 50 Ω or 1 Mω input impedance
• 2-year alignment interim and 0 to 55 ° C working temperature and a deep onboard memory
• 16, 128, or 512 MB of locally available memory
• Capture in excess of 1 million triggered waveforms in various record mode, with equipment trigger rearming
• Stream information persistently from installed memory to host memory or disk.
The NI device has a recommended operating temperature range of 0 °C to 55 °C, and a storage temperature range of -40 °C to 71 °C. It weighs 18.3 oz, and measures 8.43 x 0.8 x 5.1 in. in physical dimensions. The PXIe-5105 is equipped with 2 SMB jack front connectors, has a total power requirement of 23 W.
The PXIe-5105 is available to be calibrated. While the recommended calibration period for individual parts varies, most parts should be calibrated either annually or every two years to ensure accuracy. If you need the PXIe-5105 calibrated, Apex Waves provides options. We offer high-quality NIST accredited calibrations through a 3rd party, with an average turnaround time of 1 to 2 weeks. When you order the PXIe-5105 with us, you can request basic (unaccredited) in-house calibration that will calibrate the part to the manufacturer specifications prior to being shipped. Call or email us today for more information about calibrating the PXIe-5105!
Model | PXIe-5105 |
---|---|
Part Numbers | 783590-01, 783590-02, 783590-03 |
Manufacturer | National Instruments |
Type | PXI Oscilloscope |
Maximum Bandwidth | 60 MHz |
Voltage Input Channels | 8 |
Maximum Sample Rate | 60 MS/s |
Dimensions | 8.43 x 0.8 x 5.1 in. |
Weight | 18.3 oz. |
Warranty | Three Year Warranty |
PXIe-5105 Manual | User Manual and Maintenance Manual Available for Download |
Price | Contact a sales representative for a quote. |
National Instruments PXIe-5105 Frequently Asked Questions
Question: Why are there three part numbers for the PXIe-5105?
Answer: The PXIe-5105 has three onboard memory size options: part number 783590-01 with 16 MB onboard memory, part number 783590-02 with 128 MB onboard memory, and part number 783590-03 with 512 MB onboard memory.
Question: What is the analog input resolution for the NI PXIe-5105?
Answer: The analog input resolution for the NI PXIe-5105 is 12 bits.
Question: What is the total power for the PXIe-5105?
Answer: The total power for the PXIe-5105 is 23 W.
Question: What type of front-panel connectors are on the NI PXIe-5105?
Answer: The NI PXIe-5105 has SMB jack connectors on the front panel.
PXIe-5105 PDF Manuals & Diagrams
PXIe-5105 PDF Manuals
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI PXI PXIE PCI 5105 CALIBRATION PROCEDURE.PDF
NI PXI PXIE PCI 5105 GETTING STARTED GUIDE.PDF
OSCILLOSCOPE PROBE COMPENSATOR USER GUIDE.PDF
Why Buy From Apex Waves