National Instruments PXIe-5114 PXI Oscilloscope

The National Instruments PXIe-5114 (Part Numbers: 783591-01, 783591-02, and 783591-03) Oscilloscope has two channels that sample up to 250 MS/s with adaptable arrangement for coupling, impedance, voltage range, and filtering. The NI PXIe-5114 Oscilloscope also has a few different shooting modes, deep inside memory, and an instrument controller that incorporates information recording and examination capacities. This model is perfect for applications with quick signals that require adaptable estimation designs and up to 125 MHz of simple data transfer capacity. The PXIe-5114 additionally has advanced PXI synchronization and data logging abilities. The device is equipped with 3 BNC female, 1 SMB jack, and a 9-pin mini-circular DIN connector. It has a total power consumption of 21.63 W.

This model offers an intuitive soft front panel and configuration. The NI-SCOPE Soft Front Panel (SFP) permits intuitive control of the NI PXIe-5114. Smart control of the PXIe-5114 was most readily accessible in NI-SCOPE SFP version 14.1. The NI-SCOPE SFP is incorporated into the NI-SCOPE media. The NI Measurement Automation Explorer (MAX) tool additionally gives interactive configuration and test devices for the NI PXIe-5114. MAX is incorporated on the NI-SCOPE media. The device has a recommended warm-up time of 15 minutes, and should be externally calibrated at least once in 2 years.

This Oscilloscope offers the following features:

• Edge, window, hysteresis, and advanced triggering with 40 ps time stamping

• Pre-trigger and post-trigger acquisition in single-and multiple-record mode

• Internal 250 MHz clock or outer clock from 50 to 250 MHz

• Phase bolt to PXI 10 MHz reference or outer reference from 1 to 20 MHz

• Timestamp-triggered events with 100 ps resolution

• IVI-consistent NI-SCOPE driver for NI LabVIEW and LabWindows/CVI and additionally Microsoft C ++, Measurement Studio, and Visual Basic with more than 50 built-in estimations

• NI-SCOPE Soft Front Panel for intelligent control.

The NI device weighs 17.7 oz, and measures 8.4 x 0.8 x 5.1 in. in physical dimensions. It has a recommended operating temperature range of 0 °C to 55 °C, a storage temperature range of -40 °C to 71 °C, and an operating and non-operating random vibration of 0.3 grms and 2.4 grms respectively–all at a frequency range of 5 Hz to 500 Hz.