National Instruments PCI-6229 Multifunction DAQ

Featured with 32 single-ended or 16 differential AI, 4 AO, and 48 DIO, the National Instruments PCI-6229 (Part Number: 779068-01, 191329B-01 ) is an M Series Data Acquisition Device. With this model, the user can have 32 single ended DC coupled or 16 differential DC coupled channels at 16-bit resolution. These channels are capable of operating at four input ranges: ±0.2 V, ±1 V, ±5 V, and ±10 V. The maximum voltage allowed for the analog inputs (common mode + signal) is ±11 V of AI (analog input) GND.

The PCI-6229 DAQ is a budget DAQ device with sophisticated performance since it ensures as low as -75 dB crosstalk between adjacent channels and -90 dB between non-adjacent channels. For efficient acquisitions, the National Instruments PCI-6229 DAQ comes with 4,095 samples input FIFO, as well as a 4,095 entries scan list memory. This PCI based model supports data transfers in three modes: DMA, programmed I/O, and interrupts mode. The PCI 6229 NI also offers overvoltage protection for all sense and analog input channels (set at ±25 V).

This DAQ device is known for its effective channel configuration that includes four analog output channels. The maximum update rate achievable with one channel in operation is 833 kS/s. However, the user can achieve 740 kS/s, 666 kS/s, and 625 kS/s per channel while operating with two, three, and four channels respectively. The analog outputs incorporated in this device have ±10 V output range, 50 ns timing resolution, 0.2 Ω output impedance, and they support DC output coupling. Moreover, the output current drive possible from the NI PCI-6229 is ±5 mA.

The NI device weighs 3.5 oz, and measures 4.2 x 6.1 in. in physical dimensions. It has recommended operating and storage temperature ranges of 0 ºC to 55 ºC and -20 ºC to 70 ºC respectively, a non-condensing humidity range of 10% RH to 90% RH, operating and non-operating random vibrations of 0.3 grms and 2.4 grms respectively–all at a frequency range of 5 to 500 Hz.

PCI-6229 Mature Status has been announced by National Instruments, but will still be available for purchase and repairs by Apex Waves. 

The PCI-6229 is available to be calibrated. While the recommended calibration period for individual parts varies, most parts should be calibrated either annually or every two years to ensure accuracy. If you need the PCI-6229 calibrated, Apex Waves provides options. We offer high-quality NIST accredited calibrations through a 3rd party, with an average turnaround time of 1 to 2 weeks. When you order the PCI-6229 with us, you can request basic (unaccredited) in-house calibration that will calibrate the part to the manufacturer specifications prior to being shipped. Call or email us today for more information about calibrating the PCI-6229!