PCI-6232
Modular Systems > National Instruments > M Series
| Description: | PCI-6232, 16 AI, 24 V DIO Sourcing, Multifunction DAQ |
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments PCI-6232 Multifunction DAQ
Featured with 60 VDC Bank Isolation (continuous), the National Instruments PCI-6232 (Part Number: 779617-01) is a 16-Bit Multifunction DAQ board or data acquisition device. This model comes with 16 Analog Inputs and 24 Volt Digital I/O, including 6 digital inputs, as well as 4 sourcing digital outputs. The NI PCI-6232 has an output range of ±10 V and offers 2 DC coupled analog outputs at 500 kS/s maximum update rate (with 1 channel) and 450 kS/s per channel (with two channels).
For digital input channels, this device has a dedicated input Port 0. This port can operate over an input voltage range of 0 V to 30 V. Port 1 in this module facilitates its four digital output channels. The NI PCI 6232 comes with an incorporated frequency generator with 1 to 16 divisors, 10 MHz, and 100 kHz base clocks. The output from this frequency generator can be routed to any RTSI or PFI terminal. For the device to device triggering and various other synchronization functions, this DAQ device comes with an integrated RTSI bus.
The PCI-6232 Multifunction DAQ has 1 D-SUB type 37-pin I/O connector. This model is a 9.7 cm × 15.5 cm printed circuit board. This DAQ device can be deployed in any 3.5 or 5 Volt signal environment and draws 0.7 A of current from +5 V bus and 20 mA from +12 V bus during no load conditions. While operating in AO waveform modes, the PCI-6232 can generate various kinds of waveforms also.
PCI-6232 Legacy Status has been announced by National Instruments, but will still be available for purchase and repairs by Apex Waves.
| Model | PCI-6232 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 779617-01 |
| Series | M Series |
| Type | Multifunction DAQ |
| Analog Input Channels | 16 (16-Bit, 250 kS/s) or 08 differential |
| Analog Output Channels | 2 (16-Bit, 500 kS/s) |
| Digital Inputs | 6 |
| Digital Outputs | 4 |
| Timing I/O | 2 Counter/Timer I/O (32 bits, 80 MHz) |
| Frequency Generator Channels | 1 |
| I/O Connector | 37-pin D-SUB |
| Power Requirements | +5 V, +12 V -- 0.5 A, 20 mA |
| Dimensions | 3.8 in. × 6.1 in |
| Weight | 0.23 lb. |
| Warranty | 2-3 Year Warranty |
| PCI-6232 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for PCI-6232:
193190A-03, 193190B-03, 193190C-03, 193190D-03L, 779617-01
National Instruments PCI-6232 Frequently Asked Questions
Question: Which AO waveform modes are available on the PCI 6232?
Answer: The PCI 6232 has the following AO waveform modes: periodic waveform regeneration from host buffer including dynamic update, non-periodic waveform, and periodic waveform regeneration mode from onboard FIFO.
Question: How often should the NI PCI 6232 be calibrated?
Answer: The NI PCI 6232 should be calibrated every year.
Question: What is the input FIFO size of the PCI-6232?
Answer: The input FIFO size of the PCI-6232 is 4,095 samples.
Question: What is the calibration interval for the NI PCI-6232?
Answer: The calibration interval for the NI PCI-6232 is 1 year.
PCI-6232 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
ISOLATED M S SERIES CALIBRATION PROCEDURE.PDF
NI 6232 DEVICE SPECIFICATIONS.PDF
NI PCI PXI 623X LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PCI-6232
Modular Systems > National Instruments > M Series
PCI-6232, 16 AI, 24 V DIO Sourcing, Multifunction DAQ
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PCI-6232 Multifunction DAQ
Featured with 60 VDC Bank Isolation (continuous), the National Instruments PCI-6232 (Part Number: 779617-01) is a 16-Bit Multifunction DAQ board or data acquisition device. This model comes with 16 Analog Inputs and 24 Volt Digital I/O, including 6 digital inputs, as well as 4 sourcing digital outputs. The NI PCI-6232 has an output range of ±10 V and offers 2 DC coupled analog outputs at 500 kS/s maximum update rate (with 1 channel) and 450 kS/s per channel (with two channels).
For digital input channels, this device has a dedicated input Port 0. This port can operate over an input voltage range of 0 V to 30 V. Port 1 in this module facilitates its four digital output channels. The NI PCI 6232 comes with an incorporated frequency generator with 1 to 16 divisors, 10 MHz, and 100 kHz base clocks. The output from this frequency generator can be routed to any RTSI or PFI terminal. For the device to device triggering and various other synchronization functions, this DAQ device comes with an integrated RTSI bus.
The PCI-6232 Multifunction DAQ has 1 D-SUB type 37-pin I/O connector. This model is a 9.7 cm × 15.5 cm printed circuit board. This DAQ device can be deployed in any 3.5 or 5 Volt signal environment and draws 0.7 A of current from +5 V bus and 20 mA from +12 V bus during no load conditions. While operating in AO waveform modes, the PCI-6232 can generate various kinds of waveforms also.
PCI-6232 Legacy Status has been announced by National Instruments, but will still be available for purchase and repairs by Apex Waves.
| Model | PCI-6232 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 779617-01 |
| Series | M Series |
| Type | Multifunction DAQ |
| Analog Input Channels | 16 (16-Bit, 250 kS/s) or 08 differential |
| Analog Output Channels | 2 (16-Bit, 500 kS/s) |
| Digital Inputs | 6 |
| Digital Outputs | 4 |
| Timing I/O | 2 Counter/Timer I/O (32 bits, 80 MHz) |
| Frequency Generator Channels | 1 |
| I/O Connector | 37-pin D-SUB |
| Power Requirements | +5 V, +12 V -- 0.5 A, 20 mA |
| Dimensions | 3.8 in. × 6.1 in |
| Weight | 0.23 lb. |
| Warranty | 2-3 Year Warranty |
| PCI-6232 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCI-6232 Frequently Asked Questions
Question: Which AO waveform modes are available on the PCI 6232?
Answer: The PCI 6232 has the following AO waveform modes: periodic waveform regeneration from host buffer including dynamic update, non-periodic waveform, and periodic waveform regeneration mode from onboard FIFO.
Question: How often should the NI PCI 6232 be calibrated?
Answer: The NI PCI 6232 should be calibrated every year.
Question: What is the input FIFO size of the PCI-6232?
Answer: The input FIFO size of the PCI-6232 is 4,095 samples.
Question: What is the calibration interval for the NI PCI-6232?
Answer: The calibration interval for the NI PCI-6232 is 1 year.
PCI-6232 PDF Manuals & Diagrams
PCI-6232 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
ISOLATED M S SERIES CALIBRATION PROCEDURE.PDF
NI 6232 DEVICE SPECIFICATIONS.PDF
NI PCI PXI 623X LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
