PCI-8330
Modular Systems > National Instruments > MXI-3 Series
| Description: | PCI-8330, MXI-3 Interface Board with connections for Copper Cable |
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments PCI-8330 MXI-3 Interface Board
The PCI 8330 (Part number: 777944-01) is part of the MXI-3 innovation master/slave framework actualizing the PCI-PCI connect enroll set. It couples two physically isolate buses with either a copper or fiber-optic cable equipped for 1.5 Gbit/s serial information rates. It is possible to utilize MXI-3 to control PCI gadgets on up to 255 buses from any PCI-based framework, as long as the BIOS will support such a setup. The user can utilize either a daisy-chain or a star setup, with the greatest bus-to-bus separation of 10 meters (copper link) or 200 meters (fiber-optic link). Since the MXI-3 framework is a PCI-PCI connect, all gadgets on the framework show up as nearby gadgets in a solitary PCI framework. The user does not have to revamp their gadget drivers for tasks on an MXI-3 framework.
MXI-3 supports and retimes the signals between the buses, keeping up the tight planning and superior PCI requires. The NI PCI 8330 incorporates a setup program for Microsoft Windows working frameworks. The setup program works in a similar way for Windows 2000/NT4/9x. Clients of other working frameworks can disregard this segment. On the opposite side of the framework, the MXI-3 Interface Board gets the information, utilizing rapid photodetectors to change over light signals back to advanced information for the situation where a fiber-optic MXI-3 is utilized. A serial to parallel converter then changes over the advanced serial information to the first 20-bit wide information for the MXI-3 ASIC. MXI-3 then reproduces the PCI exchange with fitting alterations. The device has a maximum of 254 links, a data transfer rate of 132 Mbytes/s at peak performance, and 84 Mbytes per second at sustained performance.
The NI device weighs 0.33 lb, and measures 4.2 x 6.9 in. in physical dimensions. It has a recommended operating temperature range of 0 to 50 °C, a storage temperature range of –20 to 70 °C, a non-condensing operating and storage humidity range of 10 to 90% and 5 to 95% respectively.
PCI-8330 Obsolete Status has been announced by National Instruments, but will still be available for purchase and repairs by Apex Waves.
| Model | PCI-8330 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 777944-01 |
| Type | MXI-3 Interface Board |
| Maximum Number of Links | 254 (depends on BIOS) |
| Maximum Distance | 10 m (Copper Cable) |
| Peak Performance | 132 Mbytes/s |
| Sustained Performance | 84 Mbytes/s |
| Mean Time Between Failures (MTBF) | 1,130,000 hours |
| Power Requirements | +5 VDC -- 1.5 A |
| Dimensions | 4.2 in. × 6.9 in. |
| Weight | 0.33 lb. |
| Driver Software | NI-VXI, NI-VISA |
| Warranty | Three Year Warranty |
| PCI-8330 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for PCI-8330:
184693B-01, 184693C-01, 186774A-01, 186943B-01, 186943C-01, 777944-01
National Instruments PCI-8330 MXI-3 Frequently Asked Questions
Question: What are the maximum cable lengths for the PCI-8330?
Answer: The maximum length for copper cables is 10m, and the maximum length for fiber-optic cables is 200m.
Question: What is the difference between the two cable types for the PCI-8330?
Answer: Copper cables interconnect and can span up to 10 meters between systems. Fiber optic cables offer connections up to 200 meters
between systems without the use of repeaters.
Question: What are the operating and storage temperatures for the PCI-8330?
Answer: The operating temperature for the PCI-8330 is 0-50 degrees celsius, while the storage temperature is -20 to 70 degrees celsius
PCI-8330 PDF Manuals
ARCHIVED PXI PCI-8330 SERIES USER MANUAL AND SPECIFICATIONS.PDF
ARCHIVED VXI 8340 SERIES USER MANUAL AND SPECIFICATIONS.PDF
NOTE TO USERS MXI EXPRESS SERIES USER MANUAL.PDF
PXI REMOTE CONTROL AND SYSTEM EXPANSION PRODUCT FLYER.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PCI-8330
Modular Systems > National Instruments > MXI-3 Series
PCI-8330, MXI-3 Interface Board with connections for Copper Cable
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PCI-8330 MXI-3 Interface Board
The PCI 8330 (Part number: 777944-01) is part of the MXI-3 innovation master/slave framework actualizing the PCI-PCI connect enroll set. It couples two physically isolate buses with either a copper or fiber-optic cable equipped for 1.5 Gbit/s serial information rates. It is possible to utilize MXI-3 to control PCI gadgets on up to 255 buses from any PCI-based framework, as long as the BIOS will support such a setup. The user can utilize either a daisy-chain or a star setup, with the greatest bus-to-bus separation of 10 meters (copper link) or 200 meters (fiber-optic link). Since the MXI-3 framework is a PCI-PCI connect, all gadgets on the framework show up as nearby gadgets in a solitary PCI framework. The user does not have to revamp their gadget drivers for tasks on an MXI-3 framework.
MXI-3 supports and retimes the signals between the buses, keeping up the tight planning and superior PCI requires. The NI PCI 8330 incorporates a setup program for Microsoft Windows working frameworks. The setup program works in a similar way for Windows 2000/NT4/9x. Clients of other working frameworks can disregard this segment. On the opposite side of the framework, the MXI-3 Interface Board gets the information, utilizing rapid photodetectors to change over light signals back to advanced information for the situation where a fiber-optic MXI-3 is utilized. A serial to parallel converter then changes over the advanced serial information to the first 20-bit wide information for the MXI-3 ASIC. MXI-3 then reproduces the PCI exchange with fitting alterations. The device has a maximum of 254 links, a data transfer rate of 132 Mbytes/s at peak performance, and 84 Mbytes per second at sustained performance.
The NI device weighs 0.33 lb, and measures 4.2 x 6.9 in. in physical dimensions. It has a recommended operating temperature range of 0 to 50 °C, a storage temperature range of –20 to 70 °C, a non-condensing operating and storage humidity range of 10 to 90% and 5 to 95% respectively.
PCI-8330 Obsolete Status has been announced by National Instruments, but will still be available for purchase and repairs by Apex Waves.
| Model | PCI-8330 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 777944-01 |
| Type | MXI-3 Interface Board |
| Maximum Number of Links | 254 (depends on BIOS) |
| Maximum Distance | 10 m (Copper Cable) |
| Peak Performance | 132 Mbytes/s |
| Sustained Performance | 84 Mbytes/s |
| Mean Time Between Failures (MTBF) | 1,130,000 hours |
| Power Requirements | +5 VDC -- 1.5 A |
| Dimensions | 4.2 in. × 6.9 in. |
| Weight | 0.33 lb. |
| Driver Software | NI-VXI, NI-VISA |
| Warranty | Three Year Warranty |
| PCI-8330 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCI-8330 MXI-3 Frequently Asked Questions
Question: What are the maximum cable lengths for the PCI-8330?
Answer: The maximum length for copper cables is 10m, and the maximum length for fiber-optic cables is 200m.
Question: What is the difference between the two cable types for the PCI-8330?
Answer: Copper cables interconnect and can span up to 10 meters between systems. Fiber optic cables offer connections up to 200 meters
between systems without the use of repeaters.
Question: What are the operating and storage temperatures for the PCI-8330?
Answer: The operating temperature for the PCI-8330 is 0-50 degrees celsius, while the storage temperature is -20 to 70 degrees celsius
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
