PXIe-4140
Modular Systems > National Instruments > PXI Source Measure Units
Description: | PXIe-4140, 4-Channel, PXI Source Measure Unit |
Need an Official Quote?
Or speak to a sales representative for additional information:
National Instruments PXIe-4140 PXI Source Measure Unit
The National Instruments PXIe-4140 (Part Number: 781742-01) is a Source Measure Unit with four SMU channels. This SMU is perfect for large pin applications. The NI PXIe-4140 has 4 quadrants; each channel has integrated remote sensing (4 wires) for precise estimations. The quick examining rate of the PXIe-4140 can help decrease estimation times, catch transient characteristics of gadgets, and permit fast I-V portrayal of devices under test (DUT). With a rapid sequencing engine, the user can synchronize all these SMUs with each other or with different instruments, such as switches or fast computerized test modules.
This new exact 4-channel SMU highlights SourceAdapt technology. With this next-generation SMU innovation, the user can custom-tune the SMU reaction to any given load for maximum stability and minimum transient response times. This ideal SMU reaction protects the device under test from undesirable transients, while accomplishing the quickest conceivable test times and expelling framework dependability worries from oscillations. The NI PXIe-4140 with SourceAdapt innovation is perfect for testing gadgets, such as microelectromechanical frameworks, multiplying ICs with sidestep capacitors, or any board or chip-level test applications with an extensive variety of inductive or capacitive loads. It has a current range of -100 mA to 100 mA, and a voltage range of -10 V to 10 V. The device is equipped with a 25-position DSUB male front panel connector.
The PXIe 4140 additionally includes programmable output resistance, so the user can program the output resistance from –1 V/current range to +1 V/current range. For instance, on the 100 mA extend, the user can vary the output resistance from –10 O to +10 O. The positive scope of the output resistance permits the SMU channel to imitate true gadgets with nonzero output resistance, while the negative resistance range enables the user to compensate for voltage drops because of resistive losses between the remote sense focuses and the DUT terminals. The device weighs 14.99 oz., and measures 0.8 x 5.1 x 8.5 in. in physical dimensions. It has a recommended operating temperature range of 0 °C to 55 °C, and a storage temperature range of -40 °C to 70 ºC.
The PXIe-4140 is available to be calibrated. While the recommended calibration period for individual parts varies, most parts should be calibrated either annually or every two years to ensure accuracy. If you need the PXIe-4140 calibrated, Apex Waves provides options. We offer high-quality NIST accredited calibrations through a 3rd party, with an average turnaround time of 1 to 2 weeks. When you order the PXIe-4140 with us, you can request basic (unaccredited) in-house calibration that will calibrate the part to the manufacturer specifications prior to being shipped. Call or email us today for more information about calibrating the PXIe-4140!
Model | PXIe-4140 |
---|---|
Part Number | 781742-01 |
Manufacturer | National Instruments |
Type | PXI Source Measure Unit |
SMU Channels | 4 |
Voltage Range | -10 V to 10 V |
Current Range | -100 mA to 100 mA |
Dimensions | 0.8 x 5.1 x 8.5 in. |
Weight | 14.99 oz. |
Warranty | Three Year Warranty |
PXIe-4140 Manual | User Manual and Maintenance Manual Available for Download |
Price | Contact a sales representative for a quote. |
Associated part numbers for PXIe-4140:
137558A-03L, 137558A-06L, 150660A-01L, 150660B-01L, 150660C-01L, 151054A-01L, 200250A-01, 781742-01
National Instruments PXIe-4140 Frequently Asked Questions
Question: What is the current sensitivity of the PXIe-4140?
Answer: The current sensitivity of the PXIe-4140 is 100 pA.
Question: What type of front-panel connectors are on the NI PXIe-4140?
Answer: The NI PXIe-4140 has 25-position D-SUB, male front-panel connectors.
Question: What is the maximum sampling rate of the PXIe-4140?
Answer: The maximum sampling rate of the PXIe-4140 is 600 kS/s.
Question: Which software is required to calibrate the NI PXIe-4140?
Answer: The following software types are needed to calibrate the NI PXIe-4140: a supported operating system (Windows), NI-DCPower, and either LabVIEW or LabWindows/CVI.
PXIe-4140 PDF Manuals
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI PXIE 4140 4141 4142 4143 4144 4145 GETTING STARTED GUIDE.PDF
NI PXIE 4140 CALIBRATION PROCEDURE.PDF
PXI SOURCE MEASURE UNITS PRODUCT FLYER.PDF
PXIE 4140 4141 4142 4143 4144 4145 LETTER OF VOLATILITY.PDF
Driver Downloads for PXIe-4140
OS Compatibility:
Win XP 32-bit, Win 7 32-bit, Win 10 32-bit
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PXIe-4140
Modular Systems > National Instruments > PXI Source Measure Units
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
- Drivers
National Instruments PXIe-4140 PXI Source Measure Unit
The National Instruments PXIe-4140 (Part Number: 781742-01) is a Source Measure Unit with four SMU channels. This SMU is perfect for large pin applications. The NI PXIe-4140 has 4 quadrants; each channel has integrated remote sensing (4 wires) for precise estimations. The quick examining rate of the PXIe-4140 can help decrease estimation times, catch transient characteristics of gadgets, and permit fast I-V portrayal of devices under test (DUT). With a rapid sequencing engine, the user can synchronize all these SMUs with each other or with different instruments, such as switches or fast computerized test modules.
This new exact 4-channel SMU highlights SourceAdapt technology. With this next-generation SMU innovation, the user can custom-tune the SMU reaction to any given load for maximum stability and minimum transient response times. This ideal SMU reaction protects the device under test from undesirable transients, while accomplishing the quickest conceivable test times and expelling framework dependability worries from oscillations. The NI PXIe-4140 with SourceAdapt innovation is perfect for testing gadgets, such as microelectromechanical frameworks, multiplying ICs with sidestep capacitors, or any board or chip-level test applications with an extensive variety of inductive or capacitive loads. It has a current range of -100 mA to 100 mA, and a voltage range of -10 V to 10 V. The device is equipped with a 25-position DSUB male front panel connector.
The PXIe 4140 additionally includes programmable output resistance, so the user can program the output resistance from –1 V/current range to +1 V/current range. For instance, on the 100 mA extend, the user can vary the output resistance from –10 O to +10 O. The positive scope of the output resistance permits the SMU channel to imitate true gadgets with nonzero output resistance, while the negative resistance range enables the user to compensate for voltage drops because of resistive losses between the remote sense focuses and the DUT terminals. The device weighs 14.99 oz., and measures 0.8 x 5.1 x 8.5 in. in physical dimensions. It has a recommended operating temperature range of 0 °C to 55 °C, and a storage temperature range of -40 °C to 70 ºC.
The PXIe-4140 is available to be calibrated. While the recommended calibration period for individual parts varies, most parts should be calibrated either annually or every two years to ensure accuracy. If you need the PXIe-4140 calibrated, Apex Waves provides options. We offer high-quality NIST accredited calibrations through a 3rd party, with an average turnaround time of 1 to 2 weeks. When you order the PXIe-4140 with us, you can request basic (unaccredited) in-house calibration that will calibrate the part to the manufacturer specifications prior to being shipped. Call or email us today for more information about calibrating the PXIe-4140!
Model | PXIe-4140 |
---|---|
Part Number | 781742-01 |
Manufacturer | National Instruments |
Type | PXI Source Measure Unit |
SMU Channels | 4 |
Voltage Range | -10 V to 10 V |
Current Range | -100 mA to 100 mA |
Dimensions | 0.8 x 5.1 x 8.5 in. |
Weight | 14.99 oz. |
Warranty | Three Year Warranty |
PXIe-4140 Manual | User Manual and Maintenance Manual Available for Download |
Price | Contact a sales representative for a quote. |
National Instruments PXIe-4140 Frequently Asked Questions
Question: What is the current sensitivity of the PXIe-4140?
Answer: The current sensitivity of the PXIe-4140 is 100 pA.
Question: What type of front-panel connectors are on the NI PXIe-4140?
Answer: The NI PXIe-4140 has 25-position D-SUB, male front-panel connectors.
Question: What is the maximum sampling rate of the PXIe-4140?
Answer: The maximum sampling rate of the PXIe-4140 is 600 kS/s.
Question: Which software is required to calibrate the NI PXIe-4140?
Answer: The following software types are needed to calibrate the NI PXIe-4140: a supported operating system (Windows), NI-DCPower, and either LabVIEW or LabWindows/CVI.
PXIe-4140 PDF Manuals & Diagrams
PXIe-4140 PDF Manuals
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI PXIE 4140 4141 4142 4143 4144 4145 GETTING STARTED GUIDE.PDF
NI PXIE 4140 CALIBRATION PROCEDURE.PDF
PXI SOURCE MEASURE UNITS PRODUCT FLYER.PDF
PXIE 4140 4141 4142 4143 4144 4145 LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."