PXIe-4497
Modular Systems > National Instruments > DSA Devices
Description: | PXIe-4497, 16-Input, PXI Sound and Vibration Module |
Need an Official Quote?
Or speak to a sales representative for additional information:
National Instruments PXIe-4497 PXI Sound and Vibration Module
The PXIe-4497 (Part Number: 781369-01) Sound and Vibration Module with 204.8 kS/s sample rate, 114 dB, 2 gains, coupled to AC/DC, and 16 differential analog input channels is intended for sound and vibration applications with a high channel count. It has a high pass filter cutoff frequency of 0.5 Hz. With 24-bit simple sources of input and IEPE consistent current signal modulation, the NI PXIe-4497 is perfect for exactness estimations with receivers, accelerometers, and different transducers that have substantial ranges.
The PXIe-4497 offers synchronous samples on all channels. Also, the module incorporates built-in anti-aliasing channels that consequently change in accordance with the sample rate, programming selectable information gain, and wise TEDS sensor support for error-free setup. Normal applications incorporate noise, vibration and harshness (NVH) examination, expansive varieties of microphones, and dynamic structural test. The NI PXIe-4497 may introduce spurious from aliasing. This results from limitations in the data transfer capacity of the signals it can quantify. The device is equipped with a SMB digital trigger connector and InfiniBand 4x analog I/O connectors. It has a power requirement of 2100 mA at +3.3 V and 810 mA at +12 V.
When the signal voltage surpasses the input range, distortion caused by a clipped or over ranged waveform can occur. The National Instruments PXIe-4497 PXI Sound and Vibration Module incorporates over-load recognition in both the analog domain (pre-digitization) and digital domain (post-digitization). The NI PXIe-4497 module supports digital domain overload detection. The user can utilize the OverloadedChansExist and OverloadedChans properties to access to the over-load detection. An analog overrange can happen autonomously from a digital overrange, and the other way around. For instance, an IEPE accelerometer may have a resonant frequency that, when empowered, can create an overrange in the analog signal. However, on the grounds that the ADC delta-sigma innovation utilizes sharp against associating channels, the overrange is not passed into the digitized signal.
The device weighs 11.5 oz., and measures 6.3 x 3.9 in. in physical dimensions. It has a recommended operating temperature range of 0 °C to 55 °C, and a storage temperature range of –20 °C to 70 °C.
The PXIe-4497 has a "Last Time Buy" date of March 28, 2024 from NI- but it will remain available for purchase and repair with Apex Waves.
Model | PXIe-4497 |
---|---|
Part Number | 781369-01 |
Manufacturer | National Instruments |
Type | PXI Sound and Vibration Module |
Differential Analog Input Channels | 16 |
Analog Input Coupling | AC/DC |
High Pass Filter Cutoff Frequency | 0.5 Hz |
Dimensions | 6.3 x 3.9 in. |
Weight | 11.5 oz. |
Warranty | Three Year Warranty |
PXIe-4497 Manual | User Manual and Maintenance Manual Available for Download |
Price | Contact a sales representative for a quote. |
Associated part numbers for the PXIe-4497:
196153D-04L, 196153E-04L, 196153F-04L, 196153H-04L, 196153K-04L, 199108C-04L, 199108D-04L, 199108E-04L, 199108F-04L, 199108G-04L, 199108H-04L, 200629A-01, 781369-01, 781369-02
National Instruments PXIe-4497 Frequently Asked Questions
Question: What is the IEPE signal conditioning value for the PXIe-4497?
Answer: The IEPE signal conditioning value for the PXIe-4497 is 0 or 4 ma and is software-selectable.
Question: What type of analog I/O connectors are on the NI PXIe-4497?
Answer: The NI PXIe-4497 has InfiniBand 4x analog I/O connectors.
Question: What is the IEPE compliance voltage range for the PXIe-4497?
Answer: The IEPE compliance voltage range for the PXIe-4497 is 24 V.
Question: What types of analog triggers does the NI PXIe-4497 have?
Answer: The NI PXIe-4497 has start and reference triggers.
PXIe-4497 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PXI PXI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI 449X CALIBRATION PROCEDURE.PDF
NI DYNAMIC SIGNAL ACQUISITION USER MANUAL.PDF
PXIE 4497 LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PXIe-4497
Modular Systems > National Instruments > DSA Devices
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PXIe-4497 PXI Sound and Vibration Module
The PXIe-4497 (Part Number: 781369-01) Sound and Vibration Module with 204.8 kS/s sample rate, 114 dB, 2 gains, coupled to AC/DC, and 16 differential analog input channels is intended for sound and vibration applications with a high channel count. It has a high pass filter cutoff frequency of 0.5 Hz. With 24-bit simple sources of input and IEPE consistent current signal modulation, the NI PXIe-4497 is perfect for exactness estimations with receivers, accelerometers, and different transducers that have substantial ranges.
The PXIe-4497 offers synchronous samples on all channels. Also, the module incorporates built-in anti-aliasing channels that consequently change in accordance with the sample rate, programming selectable information gain, and wise TEDS sensor support for error-free setup. Normal applications incorporate noise, vibration and harshness (NVH) examination, expansive varieties of microphones, and dynamic structural test. The NI PXIe-4497 may introduce spurious from aliasing. This results from limitations in the data transfer capacity of the signals it can quantify. The device is equipped with a SMB digital trigger connector and InfiniBand 4x analog I/O connectors. It has a power requirement of 2100 mA at +3.3 V and 810 mA at +12 V.
When the signal voltage surpasses the input range, distortion caused by a clipped or over ranged waveform can occur. The National Instruments PXIe-4497 PXI Sound and Vibration Module incorporates over-load recognition in both the analog domain (pre-digitization) and digital domain (post-digitization). The NI PXIe-4497 module supports digital domain overload detection. The user can utilize the OverloadedChansExist and OverloadedChans properties to access to the over-load detection. An analog overrange can happen autonomously from a digital overrange, and the other way around. For instance, an IEPE accelerometer may have a resonant frequency that, when empowered, can create an overrange in the analog signal. However, on the grounds that the ADC delta-sigma innovation utilizes sharp against associating channels, the overrange is not passed into the digitized signal.
The device weighs 11.5 oz., and measures 6.3 x 3.9 in. in physical dimensions. It has a recommended operating temperature range of 0 °C to 55 °C, and a storage temperature range of –20 °C to 70 °C.
The PXIe-4497 has a "Last Time Buy" date of March 28, 2024 from NI- but it will remain available for purchase and repair with Apex Waves.
Model | PXIe-4497 |
---|---|
Part Number | 781369-01 |
Manufacturer | National Instruments |
Type | PXI Sound and Vibration Module |
Differential Analog Input Channels | 16 |
Analog Input Coupling | AC/DC |
High Pass Filter Cutoff Frequency | 0.5 Hz |
Dimensions | 6.3 x 3.9 in. |
Weight | 11.5 oz. |
Warranty | Three Year Warranty |
PXIe-4497 Manual | User Manual and Maintenance Manual Available for Download |
Price | Contact a sales representative for a quote. |
National Instruments PXIe-4497 Frequently Asked Questions
Question: What is the IEPE signal conditioning value for the PXIe-4497?
Answer: The IEPE signal conditioning value for the PXIe-4497 is 0 or 4 ma and is software-selectable.
Question: What type of analog I/O connectors are on the NI PXIe-4497?
Answer: The NI PXIe-4497 has InfiniBand 4x analog I/O connectors.
Question: What is the IEPE compliance voltage range for the PXIe-4497?
Answer: The IEPE compliance voltage range for the PXIe-4497 is 24 V.
Question: What types of analog triggers does the NI PXIe-4497 have?
Answer: The NI PXIe-4497 has start and reference triggers.
PXIe-4497 PDF Manuals & Diagrams
PXIe-4497 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PXI PXI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI 449X CALIBRATION PROCEDURE.PDF
NI DYNAMIC SIGNAL ACQUISITION USER MANUAL.PDF
PXIE 4497 LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."