PXIe-5698
Modular Systems > National Instruments > PXI Amplifiers
| Description: | PXIe-5698, 26.5 GHz, PXI RF Amplifier |
(expedited shipping options available)
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments PXIe-5698 PXI RF Preamplifier Module
The PXIe-5698 (Part Number: 784096-01) is a single-slot RF Preamplifier Module from National Instruments. The module is designed to work with the NI-5668R Vector Signal Analyzer. It helps boost low-level signals to the receiver. The PXIe-5698 also functions as a stand-alone Preamplifier. The frequency range of the NI PXIe-5698 is 10 MHz to 26 GHz, while the noise figure value ranges between ≤ 3.1 ~ ≤17.7. This module uses 2.92 mm female connectors. The maximum input voltage on the connectors is ±10 V DC. The maximum voltage on the source connectors is +28V DC.
The National Instruments PXIe-5698 RF Preamplifier Module has three modes of Operation: the preamplifier mode, the preamplifier bypass mode, and the enable calibration tone mode. By default, the preamplifier mode of the PXIe-5698 module is disabled. It can be enabled in the NI-RFSA driver. The preamplifier mode can further be classified into the high band or low band modes. A specified mode of operation (high band or low band) is selected by NI-RFSA. This can be accomplished by using a specified center frequency. The default setting of the center frequency is 1 GHz.
The NI PXIe-5698 is equipped with a mechanical relay, which provides an additional RF signal bypass path. Thus, the Preamplifier can be removed without reconnecting the system. The enabled calibration tone mode is basically a power check. It ensures the system is cabled properly. The calibration tone frequency is fixed at 3.6 GHz. The PXIe-5698 RF Preamplifier Module is also equipped with a noise source, which can be enabled or disabled for noise figure measurement. By default, it is disabled.
| Model | PXIe-5698 |
|---|---|
| Part Number | 784096-01 |
| Manufacturer | National Instruments |
| Type | PXI RF Preamplifier Module |
| Frequency Range | 20 MHz to 26.5 GHz |
| Microwave Gain | 30 dB |
| Driver | NI-RFSA |
| Dimensions | 8.5 x 0.8 x 5.1 in. |
| Weight | 17.6 oz. |
| Warranty | 2-3 Year Warranty |
| PXIe-5698 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for PXIe-5698:
156312A-01L, 156312B-01L, 158127C-01L, 158127D-01L, 158130C-01L, 784096-01, 787487-01
National Instruments PXIe-5698 Frequently Asked Questions
Question: What type of RF IN and RF OUT front panel connectors are on the PXIe-5698?
Answer: The PXIe-5698 has 2.92 mm female RF IN and RF OUT front panel connectors.
Question: What are the power requirements for the NI PXIe-5698?
Answer: The NI PXIe-5698 requires 6.93 W at +3.3 VDC and 26.4 W at +12 VDC, for a total of 33.33 W.
Question: Which module can be used with the PXIe-5698?
Answer: The PXIe-5668 Vector Signal Analyzer can be used with the PXIe-5698 to boost low level signals to the receiver.
Question: What type of coupling does the NI PXIe-5698 support?
Answer: The NI PXIe-5698 supports AC and DC coupling.
PXIe-5698 PDF Manuals
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI PXIE 5698 GETTING STARTED GUIDE.PDF
PXIE 5698 LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PXIe-5698
Modular Systems > National Instruments > PXI Amplifiers
PXIe-5698, 26.5 GHz, PXI RF Amplifier
(expedited shipping options available)
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PXIe-5698 PXI RF Preamplifier Module
The PXIe-5698 (Part Number: 784096-01) is a single-slot RF Preamplifier Module from National Instruments. The module is designed to work with the NI-5668R Vector Signal Analyzer. It helps boost low-level signals to the receiver. The PXIe-5698 also functions as a stand-alone Preamplifier. The frequency range of the NI PXIe-5698 is 10 MHz to 26 GHz, while the noise figure value ranges between ≤ 3.1 ~ ≤17.7. This module uses 2.92 mm female connectors. The maximum input voltage on the connectors is ±10 V DC. The maximum voltage on the source connectors is +28V DC.
The National Instruments PXIe-5698 RF Preamplifier Module has three modes of Operation: the preamplifier mode, the preamplifier bypass mode, and the enable calibration tone mode. By default, the preamplifier mode of the PXIe-5698 module is disabled. It can be enabled in the NI-RFSA driver. The preamplifier mode can further be classified into the high band or low band modes. A specified mode of operation (high band or low band) is selected by NI-RFSA. This can be accomplished by using a specified center frequency. The default setting of the center frequency is 1 GHz.
The NI PXIe-5698 is equipped with a mechanical relay, which provides an additional RF signal bypass path. Thus, the Preamplifier can be removed without reconnecting the system. The enabled calibration tone mode is basically a power check. It ensures the system is cabled properly. The calibration tone frequency is fixed at 3.6 GHz. The PXIe-5698 RF Preamplifier Module is also equipped with a noise source, which can be enabled or disabled for noise figure measurement. By default, it is disabled.
| Model | PXIe-5698 |
|---|---|
| Part Number | 784096-01 |
| Manufacturer | National Instruments |
| Type | PXI RF Preamplifier Module |
| Frequency Range | 20 MHz to 26.5 GHz |
| Microwave Gain | 30 dB |
| Driver | NI-RFSA |
| Dimensions | 8.5 x 0.8 x 5.1 in. |
| Weight | 17.6 oz. |
| Warranty | 2-3 Year Warranty |
| PXIe-5698 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PXIe-5698 Frequently Asked Questions
Question: What type of RF IN and RF OUT front panel connectors are on the PXIe-5698?
Answer: The PXIe-5698 has 2.92 mm female RF IN and RF OUT front panel connectors.
Question: What are the power requirements for the NI PXIe-5698?
Answer: The NI PXIe-5698 requires 6.93 W at +3.3 VDC and 26.4 W at +12 VDC, for a total of 33.33 W.
Question: Which module can be used with the PXIe-5698?
Answer: The PXIe-5668 Vector Signal Analyzer can be used with the PXIe-5698 to boost low level signals to the receiver.
Question: What type of coupling does the NI PXIe-5698 support?
Answer: The NI PXIe-5698 supports AC and DC coupling.
PXIe-5698 PDF Manuals & Diagrams
PXIe-5698 PDF Manuals
MAINTAIN FORCED AIR COOLING NOTE TO USERS.PDF
NI PXIE 5698 GETTING STARTED GUIDE.PDF
PXIE 5698 LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
