• sales@apexwaves.com 1-800-915-6216
  • Fast Quote

Search Our Product

Tektronix Inc

Tektronix Inc Parts In Stock & Ready to Ship | Test Equipment & Measurement Instruments | Apex Waves


Tektronix TLA5000 Series Analyzers


The Tektronix RSA300 series gives real time spectrum analysis, streaming capture, and deep signal analysis by using a combination of a PC and Tektronix SignalVu-PC™ RF Signal Analysis Software.  The Tektronix RSA300 series has a frequency range of 9 KHz to 6.2 GHz, encompasses a broad range of analysis needs, and is suitable for academics, maintenance, installation and repair in a factory or field, design and manufacturing, and interference hunting. The RSA306B is the replacement for the RSA306, but many of the specifications and features have stayed the same. The measurement range still encompasses +20 dBm to -160 dBm for both models. The RSA306B has 17 spectrum and signal analysis measurement displays, while the RSA306 has 27 standard measurements. Both models also come fully equipped with: options for mapping, modulation analysis, and WLAN and Bluetooth standards support. The Tektronix RSA300 series has other useful features, such as: a MATLAB instrument driver for use with Instrument Control Toolbox, pulse measurements, application programming interface included for Microsoft Windows, frequency settling, and a streamlining capture option to save and record ongoing events. The Tektronix RSA300 series is built to last, with shock and vibration specifications to endure being transported or used in rugged conditions.


 The Tektronix RSA3000B Spectrum Analyzer series has much to offer engineers occupied with components, RF system design, integration and performance confirmation, or operations engineers who are employed in network or spectrum management. This series has assessment abilities that will lessen test times and increase workflow. The Tektronix RSA3000B series has a DC to 8 GHz frequency range, differential IQ input, as many as 2.56 s acquisition length at 15 MHz bandwidth, and interfaces with TekConnect probes specifically for RF probing. The Tektronix RSA3000B Spectrum Analyzer series has many useful features, such as: the capability to spot interference and unrecognized signals in spectrum monitoring and management, evaluating time-variant behavior of different types of radio systems, characterizing radar and pulsed RF signals, strong vector signal analyzer functionality and signal source analysis abilities, and many more features which the user will be able to implement with ease and finesse.  

The RSA3000B series uncovers design issues that other types of signal analyzers cannot find. The screen shows a live color view of signal transients progressing, which gives the user the capability to instantaneously discover a fault. Other types of signal analyzers do not have the ability to show a live color display of transients, making the RSA3000B series one of a kind. 



The Tektronix RSA500 Spectrum Analyzer series gives an astounding performance in an easy to transport, durable instrument. This series was created to aid spectrum managers, interference hunters and network maintenance personnel who want to find interferers, keep up RF networks, and keep track of their work, giving them real-time spectrum analysis results. The Tektronix RSA500 Spectrum Analyzer series has a dynamic range of 70 dB, a frequency range that extends from 9 kHz to 3.0/7.5 GHz, a GPS/GLONASS/Beidou receiver for mapping, the ability to customize programs towards the user’s specifications, streaming captures which can store and play back ongoing procedures, and 40 MHz of bandwidth that allows real time assessment for transient capture and vector analysis. The RSA500 series also comes equipped with SignalVu-Pc software, which gives an analysis ability never before accessible in battery-operated models such as these. SignalVu-Pc software comes equipped with: a spectrum analyzer, signal recording, a DPX spectrum/spectrogram, time overview/navigator, signal recording, spurious measurement capabilities, a spectrum emission mask, AM, FM, PM analysis, signal strength with audio tone, and a multitude of other beneficial features that will enable users to cut down on testing times, record more accurate results, and best of all, they will not want to go back to using any other type of analyzer.


 The Tektronix RSA5100B series includes several Real-time Signal and Spectrum Analyzers. A few of the standard features of the Signal Analyzers are: the ability to decrease time-to-fault and increase design confidence with real-time signal processing, measurements such as channel power, ACLR, CCDF, OBW/EBW, spur search, and Emi detectors, amplitude, frequency, phase vs. time, DPX spectrum, and spectrograms, and correlated multi-domain displays. The operating temperature range for the Tektronix RSA5100B series is +10 to +40 degrees C. The RSA5100B series also has various advanced operating techniques, such as: power triggering, frequency edge triggering, frequency mask triggering, DPX density triggering, runt triggering, and time qualified triggering. There are two different modes while setting up and selecting a triggering type: free run mode and triggered mode. Free run mode initiates quickly and does not take into account trigger conditions, while triggered mode waits for a trigger event to be recognized.

There are many different optional features for the Tektronix RSA5100B series, including: adding enhanced real time (Option 09), adding AM/FM/PM and audio analysis (Option 10), adding phase noise and jitter measurement (Option 11), adding Bluetooth LE and Bluetooth Basic Rate RF transmitter measurements (Option 27), adding LTE Downlink Base Station RF transmitter measurements (Option 28), and several more.  


The RSA600 series of Spectrum Analyzers by Tektronix is ideal for the characterization of RF devices, subsystems, and systems, mobile field operations, and manufacturing assessments. The RSA600 series covers a frequency range of 9 kHz to 7.5 GHz, has an acquisition bandwidth of 40 MHz, an amplitude accuracy of 0.2 dB to 3 GHz (95% confidence), high speed full-span sweeps at 25.0 GHz per second, and a 70 dB dynamic range. There is also a USB, which allows the user to transfer the processing power to their PC and therefore access additional processing power and/or memory. The models in the series are 2.95 x 8.75 x 12.12 inches long and weigh approximately 6.15 pounds. The standard operating temperature is -10 to +55 degrees C (+14 to +131 degrees F. The RSA5600RACK has a unique function of being able to hold two RSA600 Spectrum Analyzers side by side.

The RSA600 Spectrum Analyzer series comes readily equipped with the SignalVu-PC software. The software provides an analysis capability which was formerly not available in less costly products. Signal-Vu-PC extends the bandwidth, shows each interfering signal, contains 27 different modulation types, many LTE base station transmitter measurements, Bluetooth capabilities, WLAN measurements, and the ability to playback signals that were previously recorded.


The RSA6000 Spectrum Analyzer series designed by Tektronix provides the measurement accuracy and finesse that experts desire, along with guaranteed quick results. The models have many useful measurement functions, such as: channel power, adjacent channel power, spectrum emissions mask, analog modulation measurements, phase noise and jitter measurements, advanced pulse measurements, general purpose digital modulation analysis (Option 21), and several more measurement types. The various applications for which the RSA6000 series can be utilized are: spectrum management (to discover interference and unrecognized signals), radar/EW (for complete characterization of pulsed and hopping systems), RF Debug (for components, modules, and systems), radio/satellite communications (to evaluate the time-variant behavior of cognitive radio and software-defined radio systems), and EMI diagnostics (to comfortably and safely ensure that designs will pass compliance testing).

The RSA6000 Spectrum Analyzer series has a frequency range extending from 9 kHz as far as 6.2 GHz depending on the model, a sweep speed of 1 GHz in 10 kHz RBW in less than one second, 20 dBm 3rd order intercept at 2 GHz (typical), a standard operating temperature range of +5 to +50 degrees C, dimensions of 11.1 x 18.6 x 20.9 inches, weighs 58 pounds, and has a recommended warm-up time of approximately 20 minutes. 


 The RSA7100 Spectrum Analyzer series by Tektronix is created for engineers preoccupied with the newest wideband designs in communications, radar and electronic warfare, and for spectrum managers desiring to witness the results of new wideband systems when they are fully functioning. The RSA7100 Spectrum Analyzer series enables the user to utilize the 800 MHz capacity bandwidth and to stream storage for as long as two hours at full bandwidth. The RSA7100 series can adequately cover a frequency range from 16 kHz to 14/26.5 GHz, contains DataVu-PC software for assessment of stored events, -134 dBc/Hz phase noise at 1 GHz, typical 320 MHz real time bandwidth, and real-time triggers on events of 4 ns in time domain. The Tektronix RSA7100 models each have two USB ports on the front panel and four on the back panel, they measure 17.54 x 6.79 x 22.75 inches, and weigh approximately 53.2 pounds.

The RSA7100 series has many additional hardware options, such as Options 14 or 26 to extend the frequency range, Option GPS for a GPS receiver, Option CAL for a calibration report with data, Option C7100-A for a controller without RAID storage, Option C7100-B for a controller with RAID storage, and various other options for the user’s measurement specifications.


The TLA600 series of Logic Analyzers designed by Tektronix is ideal for efficient assessment and analysis of real-time digital system operations to confirm and debug digital hardware. The TLA600 series is affordable and suitable for general-purpose timing testing. This series has models with different options for 34/68/102/136 channel logic analyzers, extends as far as 200 MHz for acquisition analysis, has a 500 MHz deep timing analysis, and also contains a processor and bus support. The Tektronix TLA600 Logic Analyzers contain the same software as other Tektronix brand Logic Analyzers, ensuring that once the user masters operating one, they can efficiently operate any of them. The TLA600 Logic Analyzers also offer the capability of sharing setups and data between the Logic Analyzers, along with being able to showcase data on Windows PCs.

The TLA600 models are equipped with a built-in 3.5 in., 1.44 MB floppy disk drive, a 10 GB hard disk drive (which can be extended to 30 GB with Option 1J), and an internal 16/8/32 CD-RW. The models in the TLA600 series have a standard operating temperature ranging from +5 to +50 degrees C, weigh 37 pounds not including probes, and have dimensions of 11.1 x 18 x 16.3 in.


The Tektronix TLA700 series of Logic Analyzers are designed especially for hardware debug and confirmation, embedded software integration, debug, and confirmation, and processor/bus debug and confirmation. The TLA700 Logic Analyzer series has many useful benefits, such as: each model is interchangeable between transportable and benchtop mainframes, they contain a broad processor and bus support, Microsoft Windows 2000 Professional PC platform gives a recognized interface, and the expansion mainframe can support as many as 8160 Logic Analyzer channels and 60 single buses. The models in this series also offer TLAVu and PatGenVu, with an off-line assessment function to look at data and generate setups on a PC. Another useful feature of the TLA700 series is the ability to look at data in waveform, listing, source code, or histogram display to complete cross-domain assessment.

The Tektronix TLA700 models TLA715 and TLA721 are modular mainframes that have the beneficial option of combining with TLA7Axx Logic Analyzers, TLA7Lx/Mx/Nx/Px/Qx Logic Analyzers, and even TLA7PG2 pattern generators. The TLA715 and TLA721 are equipped with a dual display, an internal CD-RW, hard disk, and PC card slots. There is also a replaceable hard disk, which is perfect for security or allowing multiple individuals the ability to store personal setups and data. 


The Tektronix TLA7000 Logic Analyzer series gives the user the ability to quickly uncover errors with easily viewable screens, and fast data throughput. These models offer features such as: glitch and setup/hold triggering, state, high-speed timing, and analog assessment at the same time, the ability to follow errors back to the origin in real time, even across different modules, PCI Express probing solutions, and a broad processor and bus support. The Tektronix TLA7000 series offers a 1.4 GHz clock with as high as 3.0 Gb/s data, a maximum of 156 ps/512 Mb record length timing assessment, 68/102/136 channel logic analyers, and a D-Max probing system with 0.5 pF, which eradicates the use of on-board connectors, reduces intrusion on circuits, and is perfect for differential signal applications. The TLA7000 series is also compatible with other TLA modules.

One of the most beneficial features of the TLA7000 series is that the TLA7012 and TLA7016 Benchtop mainframes can be used in conjunction with any TLA logic analyzer or pattern generator. The TLA7012 and TLA7016 are equipped with trigger in/out connections, which allows instruments such as Tektronix oscilloscopes to compare measurement outcomes. The TLA7012 and TLA7016 mainframes also contain an internal DVD-RW, hard drive, and a number of USB ports. 


The Tektronix DSA series offers outstanding performance capabilities. Its performance has no match in terms of signal acquisition and analysis. The DSA70000 also provides the best speed in various measurement environments. The series offers the best solution to engineers for many applications. It is widely used in design and testing of electronics equipment. These digital serial analyzers have the simple interface for routine operations, which enables users to easily navigate through the menu.

The DSA70000 models cover a wide range of frequency bandwidth. The range includes frequency bandwidth of 4, 6, 8, 12.5, 16 and 20 GHz. The instruments all have four channels for input signals, along with the capability to process and sample input signals in real-time. The speed of the sampling and accuracy depicted by the DSA7000 series is exceptional. It is of the order 50 GS per second. The series incorporates the largest display with touchscreen capability. It is around 12.1 inch in size. The touchscreen offers many control options and lets the user to view measurements in real-time.

The Tektronix DSA70000 comes with flexibility in terms of the applications it offers. These enable the user to conduct the spectral analysis of the signals in detail. The user can also study the transient behavior of the signals. 


TLA5000B Series Logic Analyzer

Power and simplicity at a price you can afford. The portable TLA5000B Series Logic Analyzer combines high-speed timing resolution, fast state acquisition, long record length, and sophisticated triggering at an affordable price. It is the ideal choice for today's embedded design verification tasks.

TLA6000 Series

TLA6000 Series Logic Analyzer

Comprehensive Signal Integrity Toolset and DDR2 Analysis at an
Unprecedented Price.

The affordable TLA6000 Series Logic Analyzer offers the performance needed to debug, validate, and optimize the functionality of your digital system. Quickly isolate, identify, and characterize elusive and hard-to-find problems with a comprehensive set of signal integrity debug tools. In addition, DDR2 Protocol and Debug analysis tools provide a complete and easy to use test solution for embedded DDR2 designs


The CSA7000 series of Communications Signal Analyzers designed by Tektronix is ideal for engineers who are evaluating designs for compliance to network communications requirements and assessing detrimental parameters such as signal integrity, timing margins, and jitter. Other uses for the CSA7000 series include: design development and compliance assessment for optical and electrical signals, physical layer characterization of communication signals in backplane, midplane, and embedded designs, and optical and electrical signal integrity. A few of the greatest features of the Tektronix CSA7000 series include: the large wavelength optical response, a variety of built-in compliance mask assessments that support many Telecom and Datacom standards, an eye pattern measurements suite, and a TekConnect interface which provides suitable bandwidth signal connection.

The Tektronix CSA7000 series can withstand a maximum 4 GHz bandwidth, store as much as 32 MB memory, a rise time of 100 ps, and has a waveform capture rate of over 400,000 waveforms per second. Each model in the series has four input channels, a color touchscreen, a hard disk drive that can store 20 GB, a CD-RW drive, and a floppy disk drive with a 1.44 MB maximum capacity. The standard operating temperature is 0 ºC to +50 ºC without a floppy disk or CD-ROM drives and +10 ºC to +45 ºC with them included.