783817-01 Request for Availability

National Instruments 783817-01 Compact RIO Single-Board Controller.

The part number 783817-01 from National Instruments is the identifying part number for the sbRIO-9627 Compact RIO Single-Board Controller. With a reconfigurable FPGA type Xilinx Zynq-7000, XC7Z020 All Programmable SoC, this Compact RIO Single-Board Controller has 106,400 number of flip-flops, 53,200 6-input LUTs, 220 DSP48 slices 18 x 25 multipliers, 560 KB of embedded block RAM, number of DMA channels 16 and number of logical interrupts of 32. This controller is designed to consume power of 55 W, 30 VDC maximum that is recommended with a power supply voltage range of 9 VDC to 30 VDC and reverse voltage protection of 30 VDC. 

This controller is built to operate on an ambient temperature of -40 degrees Celsius to 85 degrees Celsius and storage temperature of -40 degrees Celsius to 85 degrees Celsius with a relative operating humidity of 10% RH to 90% RH, noncondensing and relative storage humidity of 5% RH to 95% RH, noncondensing. It can be mounted at an maximum altitude of 5000 meters with a pollution degree of 2. This controller is subjected to being lightweight due to its weight of 131.3 g.  

The 783817-01 controller also features 16 single ended analog input channels and 4 analog output channels with an ADC resolution of 16 bits and a maximum aggregate sampling rate of 200 kS/s which ensures rapid data collection and processing, and a maximum update rate of 336 kS/s. The input range is configurable to ±10 V, ±5 V, ±2 V, ±1 V while the output range is set to ±10 V. The maximum working voltage is 10 V range ±11 V, 5 V range ±10.5 V, 2 V range ±9 V and 1 V range ±8.5 V. It has an input impedance of > 1 GΩ in parallel with 100 pF when powered on, and 2.3 kΩ minimum when powered off or under overload conditions. 

This controller has overrange operating voltage of 10.3 V minimum and 10.9 V maximum with an output impedance of 0.4 Ω typical and a current drive of ±3 mA/channel maximum. It is protected against short circuit to ground and power on state is 0 V.