783818-01 Request for Availability

National Instruments 783818-01 CompactRIO Single-Board Controller

National Instruments part number 783818-01 is an identifying part number for the sbRIO-9637 a CompactRIO Single-Board Controller. This controller is part of the CompactRIO OEM device family. It requires the NI CompactRIO Device Drivers software from August 2015 or later and several types of LabVIEW software to operate. The controller runs fully on the NI Linux 32-bit Real-Time operating system. The NI 783818-01 features a Xilinx Zynq-7000 FPGA and is equipped with a dual-core processor based on the ARM Cortex A9 architecture. This CompactRIO Single-Board Controller has 512 MB of volatile memory and 512 MB of non-volatile memory. The National Instruments sbRIO-9637 includes a RIO Mezzanine Card (RMC) connector. 

It features several ports, including USB host ports, a CAN port, a DIO port, an MIO port, an SD connector, and an Ethernet port. Additionally, it has SDHC ports, an RS-485 serial port, and two RS-232 serial ports. The 783818-01 comes with 16 analog input channels and 4 analog output channels, each with 16-bit ADC resolution. It also provides 28 digital input/output lines operating at 3.3 V. The device requires an external power supply ranging from 9 VDC to 30 VDC. The device is equipped with 85,000 logic cells and 106,400 flip-flops, providing substantial capacity for complex logic operations. 

The NI 783818-01 includes 53,200 6-input Look-Up Tables (LUTs) and 220 DSP slices, each featuring 18 x 25 multipliers, enhancing its capability for digital signal processing. The available block RAM totals 560 KB, supporting efficient data storage and access. With 16 DMA channels and 32 logical interrupts, the device offers robust data management and interrupt-handling capabilities. It is compatible with IEEE 802.3 standards and supports communication rates of 10 Mbps, 100 Mbps, and 1000 Mbps, with auto-negotiation and options for both half- and full-duplex modes. National Instruments has declared obsolete status for the part number 783818-01, however, it is still available for purchase and repairs at the Apex Waves website.