National Instruments NI-9683 RIO Mezzanine Card

The inputs and outputs of the NI 9683 (Part Number: 782592-01) can be linked to Single-Board RIO Controller Boards via the RIO Mezzanine Card connector. All eight analog output channels on the NI-9683 have ±30 V overvoltage protection. There are also 32 LVTTL digital I/O channels, eight scanned analog input channels, 16 simultaneous analog input channels, four relay control digital output channels, a sampling rate of 100 kS/s, 24 sinking digital output channels, 28 simultaneously sampled sourcing digital input channels, and 14 push-pull half-bridge digital output channels. The NI device has a power consumption value of up to 2 W, a typical battery life of 10 years when power is applied to the power connector, and a typical battery life of 2.5 years when in storage at 55 °C.

Since this RIO Mezzanine Card has a variety of I/O channels, the NI 9683 can be utilized in several types of industrial applications. These applications include communication with industrial instruments, such as relays to power electronics and motor control, actuators, and solenoids. The NI-9683 can be utilized with the following models: the sbRIO-9605, sbRIO-9606, and sbRIO-9607. These CompactRIO Single-Board Controllers are embedded control systems for quick commercial development and deployment.

The CompactRIO platform has useful features such as real-time determinism, dependability, and more. The CompactRIO Single-Board Controllers also have an integrated and completely validated middleware solution which reduces design time and hazards. The graphical development platform eradicates the necessity for HDL experience to utilize reconfigurable FPGA hardware. The durable structure of the NI 9683 Mezzanine Card and other CompactRIO models is built for long-term use in tough, high temperature, high EMC conditions. The CompactRIO Single-Board Controllers come with the National Instruments Linux Real-Time OS and drivers, as well as support for several different programming languages.

The NI 9683 RIO card weighs 153 g. The device has a recommended operating temperature range of -40 °C to 50 °C and in some conditions, -40 °C to 70 °C. It has a recommended storage temperature range of -40 °C to 85 °C, non-condensing operating and storage humidity ranges of 10% RH to 90% RH and 5% RH to 95% RH respectively.