Modular Systems > National Instruments > FlexRIO




Pictures shown are a representation. Actual item may vary if no part number is provided on quote request.
✔ Same Day Calibration Available
✔ 2-3 Year Warranty Included
✔ Free Ground Shipping
Or speak to a sales representative for additional information:
Phone:
1-800-915-6216Email:
sales@apexwaves.com783765-01 Request for Availability
783765-01, Standalone, Kintex-7 K325T FPGA, NI-7932 FlexRIO Controller
National Instruments 783765-01 Controller for FlexRIO
Part Number 783765-01 is the identifying part number for the National Instruments NI-7932 Controller for FlexRIO. The 783765-01 ships with a Xilinx Zynq-7020, XC7Z020 All Programmable SoC which features an ARM Cortex-A9-based dual-core processor with a speed of 667 MHz. Likewise, it features 512 MB of DDR3 RAM and 512 MB of nonvolatile memory, based on SLC NAND flash. The real-time clock accuracy is 5 ppm while the flash reboot endurance is 100000 cycles. The device comes with the NI Linux Real-Time (32-bit) operating system. Furthermore, the CMOS battery on the device has a battery life of 10 years with power applied to the power connector or in storage up to 70 °C.
The internal reference clock on the 783765-01 has a VCXO-type oscillator with a frequency of 100 MHz. Likewise, it has a single Ethernet port that is compatible with IEEE 802.3 and supports the 10Base-T, 100Base-TX, and 1000Base-T Ethernet interfaces. Furthermore, there is a single USB device and host port using the USB 2.0 Hi-Speed interface that has a maximum data rate of 480 Mb per port. The SD card slot supports SD and SDHC standards and memory sizes up to 32 GB. Moreover, there are high-speed serial ports having 2 RX and TX channels that support data rates of 10.3125 Gbps, 6.25 Gbps, and 3.125 Gbps.
The 783765-01 also features a Kintex-7 XC7K325T reconfigurable FPGA that has 203800 LUTs, 840 DSP48 slices, and an embedded block RAM of 16020 kbits. The default timebase is 40 MHz while the timebase accuracy is ±100 ppm. There are 16 DMA channels and data transfers take place through DMA, interrupts, and programmed I/O. 136 general-purpose channels in the FPGA digital I/O can be configured as 136 single-ended, 68 differential channels, or a combination of both. The 783765-01 supports an input voltage of 9 V to 30 V and consumes a maximum power of 60 W. The recommended power supply for the device is >75 W, 12 VDC. The device measures 9.21 in. × 5.14 in. × 1.73 in. in physical dimensions and weighs 1170 g.
Part Number | 783765-01 |
---|---|
Model Name | NI-7932 |
Part Type | Controller for FlexRIO |
Processor | Xilinx Zynq-7020 |
DRAM | 512 MB, DDR3 |
Nonvolatile Memory | 512 MB, SLC NAND Flash |
Number of Network Ports | 1 |
Serial Port Speeds | 10.3125 Gbps, 6.25 Gbps, 3.125 Gbps |
FPGA | Kintex-7 XC7K325T |
Operating System | NI Linux Real-Time (32-bit) |
Associated part numbers for 783765-01:
Delivery:
Warranty:
All of our products are covered by our Apex Waves Warranty.
✓ 3 Year Warranty - New Surplus Parts
✓ 2 Year Warranty - Refurbished Parts
Returns:
No hassle return policy.
Dedicated customer service team.
Quick Quotes:
Receive Price & Availability Today!
Calibration:
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Repair:
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: