VXIpc-871/700 National Instruments Embedded Computer | Apex Waves | ImageVXIpc-871-700 NewVXIpc-871-700 | Legacy, Refurbished and New Surplus
VXIpc-871/700 National Instruments Embedded Computer | Apex Waves | Image
VXIpc-871-700 New
VXIpc-871-700 | Legacy, Refurbished and New Surplus

VXIpc-871-700

4.5/5 | 12 ratings

Modular Systems > National Instruments > VXI and VME

Part Number VXIpc-871-700
Manufacturer/Brand National Instruments
Description: VXIpc-871/700, 2-slot, C-size, Embedded Computer
Request for Availablility
Fast Quote
Quoted Price
Same Day Calibration Available
2-3 Year Warranty Included
Free Ground Shipping
  Get Pricing

Need an Official Quote?

 

Or speak to a sales representative for additional information:


National Instruments VXIpc-871/700 Embedded Computer

The National Instruments VXIpc-871/700 (Part Numbers: 778340-711, 778340-012, 778340-013, 778340-011) is an Embedded, Pentium III based Controller for VXIbus Systems from the VXIpc-870 Series. This model comes equipped with a 700 MHz Pentium III Processor and has multiple PCI-based peripherals. Since it is a VXIplug&play compliant device, the NI VXIpc-871/700 can easily be installed into any VXIbus mainframe. Deploying an embedded PC controller in your VXI chassis allows for direct control of triggers, memory, VXI registers, and interrupts. The SMB connector provided on the front panel of this controller can be configured to drive the CLK10 signal in scenarios where multiple VXI mainframes operate in a tandem arrangement.

The standard features of this device include: a serial port, parallel port, GPIB, USB, Super VGA, 16-bit PC Card, etc. The NI VXIpc-871/700 is offered with 128 MB of RAM in its standard configuration. However, you can enhance the overall capability of your controller by adding more SDRAM SODIMMs just like laptops. This computer is designed to support up to 384 MB of SDRAM. The NI VXIpc-871/700 comes with a CLK10 source and a MODID register. These features make it possible to operate in slot 0 of the chassis.

This Embedded Computer utilizes TNT4882 and PCI MITE ASIC to give full, GPIB based control of external GPIB instruments through a front panel connector. The GPIB interface incorporated in this Embedded Computer is completely compatible with the NI-488.2 driver. Moreover, with HS488 protocol this device can handle transfers at up to 8 Mbytes/s. This Embedded Computer features NI WatchDog – a general-purpose timer that can be used in the monitoring of an application program.   

VXIpc-871/700 Obsolete Status has been announced by National Instruments, but the embedded computer will still be available for purchase and repairs by Apex Waves.

ModelVXIpc-871/700
ManufacturerNational Instruments
Part Numbers778340-711, 778340-012, 778340-013, 778340-011
SeriesVXIpc-870 Series
TypeEmbedded Computer
VXI Slots2
SDRAM Maximum384 MB SDRAM
Block Performance30 Mbytes/s
SizeC-size
Dimensions9.187 by 13.386 in.
Weight5.5 lb.
Warranty2-3 Year Warranty
VXIpc-871/700 ManualUser Manual and Maintenance Manual Available for Download
PriceContact a sales representative for a quote.


Associated NSNs for the VXIpc-871-700:

5998-01-505-3609 (5998015053609), 5998-01-502-1626 (5998015021626)


Why Buy From Apex Waves:

Apex Waves Youtube Video

"The business transaction was super easy and friendly."


"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"


"They were very helpful to get me the test equipment that I need."



Delivery:    
UPS, FedEX and DHL – Free Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
Warranty: All of our products are covered by our Apex Waves Warranty.
3 Year Warranty - New Surplus Parts
2 Year Warranty - Refurbished Parts
Returns: No hassle return policy.
Dedicated customer service team.
Payment: Authorize.net Visa Master Card American Express BB&T Better Business Bureau Dun & Bradstreet
Quick Quotes: Receive Price & Availability Today!
Calibration: Ask About Our Tiered Calibration Levels
Option & Modules: Confirm Your Requirements or Versions
Repair: Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Share this page: Facebook Icon Twitter Icon LinkedIn Icon
Common Typos: DXIPC-871-700, VXKPC-871-700, VXOPC-871-700, VXIPS-871-700, VXIPC-871-U00

VXIpc-871-700



Modular Systems > National Instruments > VXI and VME

VXIpc-871-700
4.5/5 | 12 ratings

VXIpc-871/700, 2-slot, C-size, Embedded Computer

Request for Availablility
Same Day Calibration Available
2-3 Year Warranty Included
Free Ground Shipping
  Get Pricing

Call now for best pricing
1-800-915-6216

National Instruments VXIpc-871/700 Embedded Computer

The National Instruments VXIpc-871/700 (Part Numbers: 778340-711, 778340-012, 778340-013, 778340-011) is an Embedded, Pentium III based Controller for VXIbus Systems from the VXIpc-870 Series. This model comes equipped with a 700 MHz Pentium III Processor and has multiple PCI-based peripherals. Since it is a VXIplug&play compliant device, the NI VXIpc-871/700 can easily be installed into any VXIbus mainframe. Deploying an embedded PC controller in your VXI chassis allows for direct control of triggers, memory, VXI registers, and interrupts. The SMB connector provided on the front panel of this controller can be configured to drive the CLK10 signal in scenarios where multiple VXI mainframes operate in a tandem arrangement.

The standard features of this device include: a serial port, parallel port, GPIB, USB, Super VGA, 16-bit PC Card, etc. The NI VXIpc-871/700 is offered with 128 MB of RAM in its standard configuration. However, you can enhance the overall capability of your controller by adding more SDRAM SODIMMs just like laptops. This computer is designed to support up to 384 MB of SDRAM. The NI VXIpc-871/700 comes with a CLK10 source and a MODID register. These features make it possible to operate in slot 0 of the chassis.

This Embedded Computer utilizes TNT4882 and PCI MITE ASIC to give full, GPIB based control of external GPIB instruments through a front panel connector. The GPIB interface incorporated in this Embedded Computer is completely compatible with the NI-488.2 driver. Moreover, with HS488 protocol this device can handle transfers at up to 8 Mbytes/s. This Embedded Computer features NI WatchDog – a general-purpose timer that can be used in the monitoring of an application program.   

VXIpc-871/700 Obsolete Status has been announced by National Instruments, but the embedded computer will still be available for purchase and repairs by Apex Waves.

ModelVXIpc-871/700
ManufacturerNational Instruments
Part Numbers778340-711, 778340-012, 778340-013, 778340-011
SeriesVXIpc-870 Series
TypeEmbedded Computer
VXI Slots2
SDRAM Maximum384 MB SDRAM
Block Performance30 Mbytes/s
SizeC-size
Dimensions9.187 by 13.386 in.
Weight5.5 lb.
Warranty2-3 Year Warranty
VXIpc-871/700 ManualUser Manual and Maintenance Manual Available for Download
PriceContact a sales representative for a quote.

Why Buy From Apex Waves

Apex Waves Youtube Video

"The business transaction was super easy and friendly."


"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"


"They were very helpful to get me the test equipment that I need."


Delivery: UPS, FedEX and DHL – Free FedEx Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
Warranty: All of our products are covered by our Apex Waves Warranty.
3 Year Warranty - New Surplus Parts
2 Year Warranty - Refurbished Parts
Returns: No hassle return policy.
Dedicated customer service team.
Payment: Authorize.Net paypal visa card master card american express card BB&T Bank better business bureau
Quick Quotes: Receive Price & Availability Today!
Calibration: Ask About Our Tiered Calibration Levels
Option & Modules: Confirm Your Requirements or Versions
Repair: Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Share this page: facebook twitter linkedIn