PCI-6071E
Modular Systems > National Instruments > E Series
| Description: | PCI-6071E, 64-Channel, 12-Bit, Multifunction DAQ |
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments PCI-6071 Multifunction DAQ
The NI PCI-6071, which used to be known as PCI-6071E, (Part number: 777515-01) is a Multifunction DAQ Device by National Instruments. This model has 64 single ended analog input channels or 32 differential analog input channels. Each channel can operate at the highest sample rate of 1.25 MS/s. The NI PCI-6071 has 16 bits resolution and an input voltage range from ±0.05 to ±10 V. There are also 2 analog output channels with the sample rate of 1 MS/s. Its output resolution range is also 12 bits. The output voltage is ±10 V. The NI PCI-6071 has 8 digital I/O lines (5V/TTL compatibility) and 2 counter/Timer I/O (24 bits at a frequency of 20 MHz).
The NI PCI 6071 is suitable for measuring sensors when merged with an NI signal conditioning system. This Multifunction DAQ can additionally be used for high-speed data logging applications. The National Instruments PCI 6071 is also viable for control applications. This device has a built-in self-adjustment system, which is completely controlled through software. The NI PCI-6071 is free from switches and jumpers. The PCI board is comprised of three groups of timing. These timing groups help control the analog input/output counter and timer functions. The timing groups also control the general-purpose counter/timer functions. The device has a power requirement of +5 VDC to 1.1 A.
The NI PCI-6071 is run using the NI-DAQ7 and can perform DAQ related configurations. This device can also perform bus related configurations. It is completely attuned to industrial standards. This enables the PCI board to perform complete bus related configurations automatically. DAQ related configurations can adjust the analog input mode and analog input polarity. This is done through ADEs like ComponentWorks, LabVIEW, and NI-DAQ, LabWindows/CVI, Measurement Studio, SignalExpress. The device has a 100-pin female 0.050 D-type connector. The device weighs 4.1 oz and has the dimensions: 6.9 x 4.2 in.
PCI-6071 Obsolete Status has been announced by National Instruments, but the Multifunction DAQ will still be available for purchase and repairs by Apex Waves.
Associated Part Numbers: 184411-01, 184411B-01, 184411C-01, 184411D-01, 184411E-01, 184411F-01, 184411G-01, 184411H-01, 184411K-01, 184411L-01, 184411M-01, 184411N-01L, 777515-01
| Model | PCI-6071 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 777515-01 |
| HTS Code | 8471804000 |
| Series | E Series |
| Type | Multifunction DAQ |
| Channels | 64 Analog Inputs (12-Bit, 1.25 MS/s) or 32 differential 2 Analog Outputs (12-Bit,1 MS/s) 8 Digital Inputs/Outputs (5 V/TTL Compatibility) 2 Counter/Timer I/O (24 bits, 20MHz ) |
| I/O Connector | 100-pin female 0.050 D-type |
| Power Requirements | +5 VDC - 1.1 A |
| Dimensions | 6.9 × 4.2 in. |
| Weight | 4.1 oz. |
| Driver Software | NI-DAQ7 |
| Warranty | Three Year Warranty |
| PCI-6071 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCI-6071 Frequently Asked Questions
Question: What is the overvoltage protection for the PCI 6071 National Instruments?
Answer: The overvoltage protection for the PCI 6071 National Instruments is ±25 V while powered on and ±15 V while powered off.
Question: What is the FIFO buffer size of the NI PCI-6071?
Answer: The FIFO buffer size of the NI PCI-6071 is 512 S.
Question: What is the NI PCI-6071 driver software called?
Answer: The NI PCI-6071 driver software is NI-DAQ 7.
Question: Which type of output coupling does the PCI 6071 have?
Answer: The PCI 6071 has DC output coupling.
PCI-6071E PDF Manuals
ARCHIVED LABVIEW DATA ACQUISITION BASICS MANUAL.PDF
ARCHIVED LABVIEW FUNCTION AND VI REFERENCE MANUAL.PDF
ARCHIVED MEASURE DATA ACQUISITION USER MANUAL.PDF
ARCHIVED NI DAQ FOR MAC OS RELEASE NOTES.PDF
ARCHIVED NI DAQ USER MANUAL FOR PC COMPATIBLES.PDF
ARCHIVED PCI E SERIES REGISTER LEVEL PROGRAMMER MANUAL.PDF
ARCHIVED TRADITIONAL NI DAQ USER MANUAL.PDF
CB 100 I O CONNECTOR BLOCK INSTALLATION GUIDE.PDF
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
DAQ MULTIFUNCTION I O MIO AND SIMULTANEOUS MULTIFUNCTION I O SMIO DEVICES CALIBRATION PROCEDURE.PDF
GUIDE D_INITIATION DAQ POUR PCI PCI EXPRESS.PDF
MULTIFUNCTION IO PRODUCT FLYER.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PCI-6071E
PCI-6071E, 64-Channel, 12-Bit, Multifunction DAQ
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PCI-6071 Multifunction DAQ
The NI PCI-6071, which used to be known as PCI-6071E, (Part number: 777515-01) is a Multifunction DAQ Device by National Instruments. This model has 64 single ended analog input channels or 32 differential analog input channels. Each channel can operate at the highest sample rate of 1.25 MS/s. The NI PCI-6071 has 16 bits resolution and an input voltage range from ±0.05 to ±10 V. There are also 2 analog output channels with the sample rate of 1 MS/s. Its output resolution range is also 12 bits. The output voltage is ±10 V. The NI PCI-6071 has 8 digital I/O lines (5V/TTL compatibility) and 2 counter/Timer I/O (24 bits at a frequency of 20 MHz).
The NI PCI 6071 is suitable for measuring sensors when merged with an NI signal conditioning system. This Multifunction DAQ can additionally be used for high-speed data logging applications. The National Instruments PCI 6071 is also viable for control applications. This device has a built-in self-adjustment system, which is completely controlled through software. The NI PCI-6071 is free from switches and jumpers. The PCI board is comprised of three groups of timing. These timing groups help control the analog input/output counter and timer functions. The timing groups also control the general-purpose counter/timer functions. The device has a power requirement of +5 VDC to 1.1 A.
The NI PCI-6071 is run using the NI-DAQ7 and can perform DAQ related configurations. This device can also perform bus related configurations. It is completely attuned to industrial standards. This enables the PCI board to perform complete bus related configurations automatically. DAQ related configurations can adjust the analog input mode and analog input polarity. This is done through ADEs like ComponentWorks, LabVIEW, and NI-DAQ, LabWindows/CVI, Measurement Studio, SignalExpress. The device has a 100-pin female 0.050 D-type connector. The device weighs 4.1 oz and has the dimensions: 6.9 x 4.2 in.
PCI-6071 Obsolete Status has been announced by National Instruments, but the Multifunction DAQ will still be available for purchase and repairs by Apex Waves.
| Model | PCI-6071 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 777515-01 |
| HTS Code | 8471804000 |
| Series | E Series |
| Type | Multifunction DAQ |
| Channels | 64 Analog Inputs (12-Bit, 1.25 MS/s) or 32 differential 2 Analog Outputs (12-Bit,1 MS/s) 8 Digital Inputs/Outputs (5 V/TTL Compatibility) 2 Counter/Timer I/O (24 bits, 20MHz ) |
| I/O Connector | 100-pin female 0.050 D-type |
| Power Requirements | +5 VDC - 1.1 A |
| Dimensions | 6.9 × 4.2 in. |
| Weight | 4.1 oz. |
| Driver Software | NI-DAQ7 |
| Warranty | Three Year Warranty |
| PCI-6071 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCI-6071 Frequently Asked Questions
Question: What is the overvoltage protection for the PCI 6071 National Instruments?
Answer: The overvoltage protection for the PCI 6071 National Instruments is ±25 V while powered on and ±15 V while powered off.
Question: What is the FIFO buffer size of the NI PCI-6071?
Answer: The FIFO buffer size of the NI PCI-6071 is 512 S.
Question: What is the NI PCI-6071 driver software called?
Answer: The NI PCI-6071 driver software is NI-DAQ 7.
Question: Which type of output coupling does the PCI 6071 have?
Answer: The PCI 6071 has DC output coupling.
PCI-6071E PDF Manuals & Diagrams
PCI-6071E PDF Manuals
ARCHIVED LABVIEW DATA ACQUISITION BASICS MANUAL.PDF
ARCHIVED LABVIEW FUNCTION AND VI REFERENCE MANUAL.PDF
ARCHIVED MEASURE DATA ACQUISITION USER MANUAL.PDF
ARCHIVED NI DAQ FOR MAC OS RELEASE NOTES.PDF
ARCHIVED NI DAQ USER MANUAL FOR PC COMPATIBLES.PDF
ARCHIVED PCI E SERIES REGISTER LEVEL PROGRAMMER MANUAL.PDF
ARCHIVED TRADITIONAL NI DAQ USER MANUAL.PDF
CB 100 I O CONNECTOR BLOCK INSTALLATION GUIDE.PDF
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
DAQ MULTIFUNCTION I O MIO AND SIMULTANEOUS MULTIFUNCTION I O SMIO DEVICES CALIBRATION PROCEDURE.PDF
GUIDE D_INITIATION DAQ POUR PCI PCI EXPRESS.PDF
MULTIFUNCTION IO PRODUCT FLYER.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
