PCI-7324
Modular Systems > National Instruments > PCI Controllers
| Description: | PCI-7324, 8-bit, Motion Controller |
(expedited shipping options available)
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments PCI-7324 Motion Controller
Designed to operate in open or closed-loop mode, the National Instruments PCI-7324 is a Stepper Motor Motion Controller. This Controller comes with quadrature encoders for velocity and position feedback. The NI PCI-7324 can be utilized for any micro-stepping, half, and full applications. National Instruments offers a broad range of optional equipment including connector blocks, cables, amplifier units, Universal Motion Interfaces, and other accessories to use with the PCI-7324. For integrated motion inhibit provision and signal conditioning, users can consider UMI connectivity blocks as well.
This Motion Controller is fully compatible with PCI Local Bus Specs, Rev 2.1. Thus, the host computer will automatically perform all configuration-related tasks. Most of the settings, including I/O port direction and limit switch polarity, are accessible through software and require no switching of jumpers. However, some settings do involve jumper adjustments for proper configuration. This Motion Controller can be installed quickly to any empty 5 V PCI slot on a computer. The National Instruments PCI-7324 comes with one 68-Pin Digital I/O connector and one 68-Pin Motional I/O connector.
For accurate position controlling, this device features trapezoidal profile control. Thus, it offers point-to-point based motion controlling on the basis of the difference between the desired target and the current position. With this module, at lower speeds, the user can boost the acceleration since it allows the user to control the acceleration factor. The NI PCI-7324 also offers event-based motion profiling- an advanced feature in which motion control functions are preloaded into trigger buffers located on the device`s onboard memory.
Each NI PCI-7324 requires:
-UMI-7764 Universal Motion Interface: 777978-02
-SH68-C68-S Cable: 186381-0R5, 186381-01, and 186381-02
PCI-7324 Obsolete Status has been announced by National Instruments, but will still be available for purchase and repairs by Apex Waves.
| Model | PCI-7324 |
|---|---|
| Manufacturer | National Instruments |
| Type | Motion Controller |
| Operating Mode | Closed-Loop, Open-Loop |
| Maximum Step Frequency | 750,000 steps/s |
| Maximum Encoder Frequency | 1 MHz |
| Analog Input | 0 to Vcc (8 bits) |
| Input Voltage Range | 0 to 12 V |
| Output Voltage Range | 0 to 5 V |
| Power Consumption | 6 W |
| Power Requirements | +5, +12 V, –12 V -- 1.2 A, 0 A, 0 A |
| Motion I/O Connector | 68-pin female VHDCI |
| Digital I/O Connector | 68-pin female VHDCI |
| Dimensions | 6.3 in × 3.9 in. |
| Software Driver | NI-Motion |
| Warranty | 2-3 Year Warranty |
| PCI-7324 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for the PCI-7324:
186357-14, 186357A-14, 186357B-14, 190976D-02, 777977-14
National Instruments PCI-7324 Frequently Asked Questions
Question: Will the PCI-7324 work with LabVIEW 7.1?
Answer: If you install ValueMotion 5.0.2 on Windows 95/98/NT/2000/ME, you should be able to use ValueMotion in LabVIEW 7.1 with your PCI-7324.
Question: Is Windows XP compatible with PCI-7324?
Answer: No, Windows XP is not compatible with the PCI-7342. Only older versions of Windows are compatible.
Question: Can I use ValueMotion using LabVIEW 2009 with the PCI-7324?
Answer: ValueMotion is not compatible with LabVIEW 2009 when using the PCI-7324.
PCI-7324 PDF Manuals
7324 7314 HARDWARE USER MANUAL.PDF
ARCHIVED FLEXMOTION SOFTWARE REFERENCE MANUAL.PDF
ARCHIVED MOTION CONTROL 7324 7314 HARDWARE USER MANUAL.PDF
ARCHIVED VALUEMOTION SOFTWARE REFERENCE MANUAL.PDF
Why Buy From Apex Waves:
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PCI-7324
Modular Systems > National Instruments > PCI Controllers
PCI-7324, 8-bit, Motion Controller
(expedited shipping options available)
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PCI-7324 Motion Controller
Designed to operate in open or closed-loop mode, the National Instruments PCI-7324 is a Stepper Motor Motion Controller. This Controller comes with quadrature encoders for velocity and position feedback. The NI PCI-7324 can be utilized for any micro-stepping, half, and full applications. National Instruments offers a broad range of optional equipment including connector blocks, cables, amplifier units, Universal Motion Interfaces, and other accessories to use with the PCI-7324. For integrated motion inhibit provision and signal conditioning, users can consider UMI connectivity blocks as well.
This Motion Controller is fully compatible with PCI Local Bus Specs, Rev 2.1. Thus, the host computer will automatically perform all configuration-related tasks. Most of the settings, including I/O port direction and limit switch polarity, are accessible through software and require no switching of jumpers. However, some settings do involve jumper adjustments for proper configuration. This Motion Controller can be installed quickly to any empty 5 V PCI slot on a computer. The National Instruments PCI-7324 comes with one 68-Pin Digital I/O connector and one 68-Pin Motional I/O connector.
For accurate position controlling, this device features trapezoidal profile control. Thus, it offers point-to-point based motion controlling on the basis of the difference between the desired target and the current position. With this module, at lower speeds, the user can boost the acceleration since it allows the user to control the acceleration factor. The NI PCI-7324 also offers event-based motion profiling- an advanced feature in which motion control functions are preloaded into trigger buffers located on the device`s onboard memory.
Each NI PCI-7324 requires:
-UMI-7764 Universal Motion Interface: 777978-02
-SH68-C68-S Cable: 186381-0R5, 186381-01, and 186381-02
PCI-7324 Obsolete Status has been announced by National Instruments, but will still be available for purchase and repairs by Apex Waves.
| Model | PCI-7324 |
|---|---|
| Manufacturer | National Instruments |
| Type | Motion Controller |
| Operating Mode | Closed-Loop, Open-Loop |
| Maximum Step Frequency | 750,000 steps/s |
| Maximum Encoder Frequency | 1 MHz |
| Analog Input | 0 to Vcc (8 bits) |
| Input Voltage Range | 0 to 12 V |
| Output Voltage Range | 0 to 5 V |
| Power Consumption | 6 W |
| Power Requirements | +5, +12 V, –12 V -- 1.2 A, 0 A, 0 A |
| Motion I/O Connector | 68-pin female VHDCI |
| Digital I/O Connector | 68-pin female VHDCI |
| Dimensions | 6.3 in × 3.9 in. |
| Software Driver | NI-Motion |
| Warranty | 2-3 Year Warranty |
| PCI-7324 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCI-7324 Frequently Asked Questions
Question: Will the PCI-7324 work with LabVIEW 7.1?
Answer: If you install ValueMotion 5.0.2 on Windows 95/98/NT/2000/ME, you should be able to use ValueMotion in LabVIEW 7.1 with your PCI-7324.
Question: Is Windows XP compatible with PCI-7324?
Answer: No, Windows XP is not compatible with the PCI-7342. Only older versions of Windows are compatible.
Question: Can I use ValueMotion using LabVIEW 2009 with the PCI-7324?
Answer: ValueMotion is not compatible with LabVIEW 2009 when using the PCI-7324.
PCI-7324 PDF Manuals & Diagrams
PCI-7324 PDF Manuals
7324 7314 HARDWARE USER MANUAL.PDF
ARCHIVED FLEXMOTION SOFTWARE REFERENCE MANUAL.PDF
ARCHIVED MOTION CONTROL 7324 7314 HARDWARE USER MANUAL.PDF
ARCHIVED VALUEMOTION SOFTWARE REFERENCE MANUAL.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
