National Instruments 780319-01 Oscilloscope

The 780319-01 from National Instruments is the identifying part number for the variation of the PXI-5154 Oscilloscope that has 8 MB of onboard memory per channel. Designed to capture and characterize rapid, nanosecond-edge speed rates, the 780319-01 is the perfect choice for a wide range of applications across industries- from consumer electronics to aerospace. With 8 MB of memory, the oscilloscope is equipped with a maximum of 32,768 records. The two analog input channels of the 780319-01 oscilloscope are simultaneously sampled and feature BNC connectors. The SMB connector found on the front panel provides easy connection to an external sample clock source.

The IVI-compliant driver NI-SCOPE supports the 780319-01 and allows for easy access to device control, calibration, and configuration settings via an interactive soft front panel. NI-SCOPE pairs the oscilloscope with documentation and programming interfaces including LabVIEW, Measurement Studio, Microsoft Visual C++, and more. If a 64 bit system is being used, the software InstrumentStudio this panel can be used to monitor measurements form one convenient place.

The 780319-01 offers both self-calibration and external calibration, both of which are practical procedures. For onboard references and external trigger levels, external calibration works best; for rectifying problems in the device's gain, triggering, offset, and timing, self-calibration works best. Software is in charge of self-calibration, and external calibration is recommended every 2 years.

With dimensions of only 21.6 cm × 2.0 cm × 13.0 cm (8.5 in × 0.8 in × 5.1 in), the 780319-01's small form factor weighs 481 g (16.97 oz). It operates optimally in a temperature range of 0 °C to 55 °C with a relative humidity of 10% to 90%. It may be stored securely in the temperature range of -40 °C to 71 °C.