National Instruments 784226-01 PXI Oscilloscope

Part number 784226-01 from National Instruments is the version of the PXIe-5172 PXI Oscilloscope that is equipped with 8 Channels and features a Kintex-7 410T FPGA. In comparison to the FPGAs for the other variations of this oscilloscope, the Kintex-7 410T has significantly higher amounts of FPGA resources, including DSPs and LUTs. With increased resources comes increased performance, making the 784226-01 an excellent choice for a wide variety of test and measurement applications in a wide range of industries. Equipped with on onboard memory size of 1.5 GB, the oscilloscope is ready to tackle challenges both big and small.

Signal quality and integrity is paramount to the 784226-01, which is designed to collect signals with minimal noise and skew. This is especially important for interpreting signals that come from noisy and time-sensitive applications. The 784226-01 supports a range of trigger types, including Window, Digital, Edge, Software, Immediate, and Hysteresis. The analog trigger source is CH <0..7>, and the specifications for the triggers are always valid when the NI-SCOPE driver is used for programming. 

The NI-SCOPE driver facilitates programming with interfaces and applications for software including LabVIEW, Measurement Studio, LabWindows, .NET, and C+ / C++.  In addition, NI-SCOPE can be used with a 64 bit system to control InstrumentStudio software in order to record, monitor, and even control the various measurements that are made with the 784226-01.

Physically, the 784226-01 oscilloscope weighs in at only 461 g (16.3 oz), and measures 18.5 cm × 2.0 cm × 13.0 cm (7.3 in × 0.8 in × 5.1 in). Rated for indoor use only, the device has a pollution degree of 2 and can be used in altitudes up to 2.000m. It has an operating temperature range of  0 °C to 45 °C and a storage temperature range of -40 °C to 71 °C.