RM-4339
Test & Measurement Misc > National Instruments > Terminal Blocks
| Description: | RM-4339, 8 Analog Input Channels, D-SUB or BNC, RJ50 Connections, NI Terminal Block |
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments RM-4339 Terminal Block
The RM-4339 (Part Numbers: 783536-01, 783535-01) rack-mount terminal block is designed specifically to interact with the PXIe-4339 PXI Strain/Bridge Input Module. It provides an adaptable solution for debugging and testing applications. It facilitates the performance of accurate measurement and analytical activities in industrial automation-related environments.
The RM-4339 provides flexibility in connecting with different instruments and devices because of its many back-end and front-end interfaces. Its back-end connectors consist of two 2-pin COMBICON terminals, one 4-pin COMBICON, and three 96-pin Female DIN terminals. 24 RJ50, three 9-pin D-SUB, three 25-pin D-SUB, and three BNC connectors are available on the front end.
The RM-4339 allows for extensive data capture and monitoring with 8 analog input channels per position (A, B, and C). With a maximum of 10 μV at 23°C ±5°C and a typical 2 μV in the same temperature range, the AI± differential input assures little offset voltage. The highest offset voltage stability rating is 0.5 μV/°C.
The RM-4339 accepts an external power supply with a voltage range of 6V to 28V single-ended and a maximum current rating of 2.4A and 100mA per EX+. There is 0.7 Ω of route resistance between the EXT PWR and the EX+ channel.
The RM-4339 guarantees dependable performance even in demanding conditions by operating throughout a broad temperature range of 0°C to 55°C and relative humidity range of 10% to 90%. It can tolerate random vibration between 5 and 500 Hz as well as operational shock up to 30 g peak.
Among the bridge completion possibilities are quarter-bridge completion, which offers exact measurements with low tolerance and stability, and values of 120 Ω, 350 Ω, and 1 kΩ. To improve calibration capabilities, it also has shunt calibration resistors (SCA) and quarter-bridge shunt calibration resistors (SCB).
The RM-4339 has three ports (A, B, and C) that enable it to be linked to three NI PXIe-4339 modules at once. Every location is powered and controlled independently by the connecting module. Additionally, it allows in-situ calibration, which eliminates the need to disconnect any inputs and enables measurement errors and uncertainties to be confirmed against a traceable reference.
| Model Name | RM-4339 |
|---|---|
| Part Number(s) | 783536-01, 783535-01 |
| Manufacturer | National Instruments (NI) |
| Analog Input Channels | 8 per position (A, B, C) |
| Offset Voltage (Max) | 10 μV @ 23 °C ±5 °C (AI±); 2 μV typ @ 23 °C ±5 °C |
| Offset Voltage Stability | 0.5 μV/°C max |
| External Power Voltage Range | 6 V to 28 V single-ended |
| External Power Current Rating | 2.4 A max; 100 mA per EX+ |
| Path Resistance | 0.7 Ω (EXT PWR to EX+ channel) |
| Operating Temperature Range | 0 °C to 55 °C |
| Relative Humidity Range | 10% to 90%, noncondensing |
| Operating Shock | 30 g peak, half-sine, 11 ms pulse |
| Random Vibration (Operating) | 5 Hz to 500 Hz, 0.3 g rms |
| Random Vibration (Non-operating) | 5 Hz to 500 Hz, 2.4 grms |
RM-4339 PDF Manuals
RM-4339 CALIBRATION PROCEDURE.PDF
RM-4339 DECLARATION OF CONFORMITY.PDF
RM-4339 DIMENSIONAL DRAWINGS.PDF
RM-4339 LETTER OF VOLATILITY.PDF
RM-4339 USER GUIDE AND TERMINAL BLOCK SPECIFICATIONS.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
RM-4339
Test & Measurement Misc > National Instruments > Terminal Blocks
RM-4339, 8 Analog Input Channels, D-SUB or BNC, RJ50 Connections, NI Terminal Block
1-800-915-6216
- Description
- Technical Specifications
- Manuals & PDFs
National Instruments RM-4339 Terminal Block
The RM-4339 (Part Numbers: 783536-01, 783535-01) rack-mount terminal block is designed specifically to interact with the PXIe-4339 PXI Strain/Bridge Input Module. It provides an adaptable solution for debugging and testing applications. It facilitates the performance of accurate measurement and analytical activities in industrial automation-related environments.
The RM-4339 provides flexibility in connecting with different instruments and devices because of its many back-end and front-end interfaces. Its back-end connectors consist of two 2-pin COMBICON terminals, one 4-pin COMBICON, and three 96-pin Female DIN terminals. 24 RJ50, three 9-pin D-SUB, three 25-pin D-SUB, and three BNC connectors are available on the front end.
The RM-4339 allows for extensive data capture and monitoring with 8 analog input channels per position (A, B, and C). With a maximum of 10 μV at 23°C ±5°C and a typical 2 μV in the same temperature range, the AI± differential input assures little offset voltage. The highest offset voltage stability rating is 0.5 μV/°C.
The RM-4339 accepts an external power supply with a voltage range of 6V to 28V single-ended and a maximum current rating of 2.4A and 100mA per EX+. There is 0.7 Ω of route resistance between the EXT PWR and the EX+ channel.
The RM-4339 guarantees dependable performance even in demanding conditions by operating throughout a broad temperature range of 0°C to 55°C and relative humidity range of 10% to 90%. It can tolerate random vibration between 5 and 500 Hz as well as operational shock up to 30 g peak.
Among the bridge completion possibilities are quarter-bridge completion, which offers exact measurements with low tolerance and stability, and values of 120 Ω, 350 Ω, and 1 kΩ. To improve calibration capabilities, it also has shunt calibration resistors (SCA) and quarter-bridge shunt calibration resistors (SCB).
The RM-4339 has three ports (A, B, and C) that enable it to be linked to three NI PXIe-4339 modules at once. Every location is powered and controlled independently by the connecting module. Additionally, it allows in-situ calibration, which eliminates the need to disconnect any inputs and enables measurement errors and uncertainties to be confirmed against a traceable reference.
| Model Name | RM-4339 |
|---|---|
| Part Number(s) | 783536-01, 783535-01 |
| Manufacturer | National Instruments (NI) |
| Analog Input Channels | 8 per position (A, B, C) |
| Offset Voltage (Max) | 10 μV @ 23 °C ±5 °C (AI±); 2 μV typ @ 23 °C ±5 °C |
| Offset Voltage Stability | 0.5 μV/°C max |
| External Power Voltage Range | 6 V to 28 V single-ended |
| External Power Current Rating | 2.4 A max; 100 mA per EX+ |
| Path Resistance | 0.7 Ω (EXT PWR to EX+ channel) |
| Operating Temperature Range | 0 °C to 55 °C |
| Relative Humidity Range | 10% to 90%, noncondensing |
| Operating Shock | 30 g peak, half-sine, 11 ms pulse |
| Random Vibration (Operating) | 5 Hz to 500 Hz, 0.3 g rms |
| Random Vibration (Non-operating) | 5 Hz to 500 Hz, 2.4 grms |
RM-4339 PDF Manuals & Diagrams
RM-4339 PDF Manuals
RM-4339 CALIBRATION PROCEDURE.PDF
RM-4339 DECLARATION OF CONFORMITY.PDF
RM-4339 DIMENSIONAL DRAWINGS.PDF
RM-4339 LETTER OF VOLATILITY.PDF
RM-4339 USER GUIDE AND TERMINAL BLOCK SPECIFICATIONS.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
