Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Keysight/Agilent P9375A, 1 Source, 2 Ports, 26.5 Maximum Frequency, Streamline USB Vector Network Analyzer
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Keysight/Agilent P9375A Streamline USB Vector Network Analyzer
The Keysight P9375A Streamline USB Vector Network Analyzer is a 26.5 GHz two-port unit. It provides computer-controlled network measurements from 300 kHz to 26.5 GHz. The unit is designed for benchtop use with a compact USB architecture. It supports precise S-parameter characterization for wireless communication and aerospace and defense test applications. The analyzer provides 2 measurement ports with 50 ohm impedance for controlled RF and microwave testing. The port interface supports 3.5 mm female connectors along with SMA female and SMB female connector configurations.
The unit offers 1 Hz to 12 Hz frequency resolution for detailed response analysis. Its frequency coverage supports device verification across low-frequency RF through microwave component operating ranges. The measurement speed is rated at 24 m/sec for efficient acquisition during repetitive test operations. The sweep speed is specified at 14 ms, which supports fast trace updates during characterization workflows.
The P9375A USB VNA delivers 65 dB to 122 dB dynamic range for evaluating high-loss and high-isolation devices. The output power reaches up to 10 dBm for stimulating devices under defined measurement conditions. The power sweep range extends from -40 dBm to 7 dBm for gain compression and level-dependent testing. The noise floor is specified from -108 dBm to -98 dBm across relevant operating conditions. This sensitivity helps the instrument measure weak responses while maintaining dependable trace stability. The directivity ranges from 31 dB to 52 dB, which supports reflection measurement accuracy after calibration. This helps improve return loss and impedance matching evaluations across the supported frequency span.
The USB vector network analyzer uses 10 Hz IF bandwidth for high-resolution measurements. The harmonic performance is specified from -14 dBc to -5 dBc for source-related spectral behavior. The display requirement is 1024 x 768 for clear software operation and measurement visualization. The analyzer supports Windows 7 or Windows 10 64-bit operating systems for host control. The recommended software operation requires an Intel i5 6th Generation or newer host processor. It also supports Intel Xeon E3 v3 or newer processor platforms for workstation-based configurations. The Keysight P9375A VNA is powered through a 15 V rear panel DC connector for stable system operation. This external supply arrangement supports compact installation and organized integration within automated measurement racks.
| Model | P9375A |
|---|---|
| Manufacturer | Keysight/Agilent |
| Part Type | Streamline USB Vector Network Analyzer, 26.5 GHz |
| Frequency Range | 300 kHz to 26.5 GHz |
| Number of Ports | 2 Ports |
| Port Impedance | 50 Ohms |
| Frequency Resolution | 1 Hz to 12 Hz |
| Measurement speed | 24 ms |
| Output Power | Up to 10 dBm |
| Directivity | 31 to 52 dB |
Associated part numbers for P9375A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: