Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
cDAQ-MIO4300 Bundle
cDAQ-MIO4300, 4-Slot USB Chassis, 4 to 16-Channel Modules, CompactDAQ Measurement Bundle
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments cDAQ-MIO4300 CompactDAQ Measurement Bundle
The cDAQ-MIO4300 (Part Number: 868015-01) system combines a four-slot cDAQ-9174 USB chassis with the NI-9205 (16-channel) analog input module, the NI-9263 (four-channel) analog output module, and the NI-9401 (eight-channel) digital I/O module. This is a modular CompactDAQ solution for precise voltage measurements (analog input), signal generation (analog output), and signal analysis (digital I/O) for test, research, and industrial automation applications.
The NI-9205 provides 16 differential (or 32 single-ended) analog input channels, allowing programmable input ranges from ±200 mV to ±10 V, internally synchronized 16-bit oversampled data with up to 250 kS/sec total rates, with channel-to-ground isolation, and over-voltage protection for each individual input channel. This helps ensure safe voltage acquisition for individual transducer signals. The NI-9263 provides four simultaneously sampled, 16-bit analog output channels, with ± 10 V output ranges and good short-circuit and over-voltage protection, fast settling time and low cross-talk, thus allowing accurate generation of signals. The NI-9401 gives eight individually-configurable bidirectional 5 V/TTL digital channel pairs giving ready access to the generation of timed pulses, digital protocols, and counter/timer operations in general.
The Chassis provides coordinated timing and triggers, programmable internal AO regeneration, four counter/timer operations, PFI (Programmable Function Interface) for synchronous cabling operations, and USB 2.0 interfacing of the CompactDAQ system for laptop or embedded PC installations. Engineers use the compact chassis for sensor/actuators characterization, prototype validation, automated production test and HIL validation, where increased ease is given through isolated inputs and programmable triggers and modular C Series I/O performs easier integration with transducers, signal conditioning, and PLC-derived test racks. Together with the system, a terminal block, backshell and strain kits, USB A-B cables, and AC/DC power supplies form part of easier wiring and integration.
The system is compatible with a range of NI software including LabVIEW and FlexLogger, but uses software open to further languages including Python, ANSI C, and C#.NET for faster growth and development of processing programs, TDMS and CSV data logging, program inline calculations, and automated sequences for test. The CompactDAQ MIO4300 can give ready access to solutions in bench laboratories, field measurements, control validation, and automated test systems requiring modular but well synchronized voltage I/O, giving synchronized sample-rate synchronously together with very easily-variable software programming approaches. Great for average voltage-working (workings to do with voltages).
| Model | cDAQ-MIO4300 Bundle |
|---|---|
| Part Number | 868015-01 |
| Part Type | CompactDAQ I/O Bundle |
| Analog Input (NI-9205) | 16-Bit, ±10 V, 250 kS/s, 16 Differential/32 Single-Ended |
| Analog Output (NI-9263) | 16-Bit, ±10 V, 100 kS/s/ch, 4 AO |
| Digital I/O (NI-9401) | 8 TTL Lines, Bidirectional, 20 MHz |
| Chassis (cDAQ-9174) | 4-Slot USB, 9–30 VDC, 15 W |
| Isolation | 250 V RMS (AI/AO), 60 V DC (DIO) |
| Operating Temperature | −40 °C to 70 °C |
| Relative Humidity | 10–90% |
| Software Support | LabVIEW, FlexLogger, Python, C, MATLAB |
Associated part numbers for cDAQ-MIO4300 Bundle:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
