Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
TDK Lambda GEN30-170, Constant Voltage, Constant Current, Programmable DC Power Supply
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
TDK Lambda GEN30-170 Programmable DC Power Supply
The TDK Lambda GEN30-170 is a programmable DC power supply built for precision-driven industrial automation. The model provides fast dynamic response for applications with rapidly changing load conditions. The up-programming response time from zero volts to the full rated output voltage is 30 milliseconds. The full load-down programming response completes in 50 milliseconds, while no load-down programming response extends to 800 milliseconds. The transient output voltage recovery after a 10 to 100 percent load step is completed in under 1 millisecond.
The GEN30-170 power supply delivers a rated output of 30 V and 170 A with a maximum total power of 5100 W. The unit operates in constant voltage mode and constant current mode to suit diverse load requirements. These dual operating modes allow the power supply to serve a broad range of test and process control environments.
The electrical output stability in constant voltage mode is a defining characteristic of the GEN30-170 supply module. The line regulation is held to 3 mV, and load regulation is maintained at 9.5 mV under rated operating conditions. The peak-to-peak ripple noise at 20 MHz is 70 mV, and the RMS ripple from 5 Hz to 1 MHz is 10 mV. The remote sense wire compensation supports up to 5 V to preserve output accuracy at the load terminals.
The long-term thermal performance of the GEN30-170 Programmable DC Power Supply ensures accuracy across continuous and sustained industrial operation.
The temperature coefficient is 50 PPM per degree Celsius measured after 30 minutes of warm-up time. The voltage stability over an 8-hour interval following the 30-minute warm-up is maintained at 0.01% of rated output. The warm-up drift is limited to below 0.05% of rated output voltage, ensuring reliable early-cycle measurement accuracy.
The GEN30-170 operates across a temperature range of 0 to 50 degrees Celsius at full rated load. The shock resistance is specified at less than 20 G half sine at 11 milliseconds with the unit unpacked. The operating altitude for the model reaches 10000 feet, with output current derated by 2% per 100 meters above 2000 meters.
Part Number |
GEN30-170 |
|---|---|
Manufacturer |
TDK Lambda |
Part Type |
Programmable DC Power Supply |
Input Voltage Range: AC |
170 To 265 Vac |
Input Frequency Range |
47 To 63 Hz |
Rated Output Voltage DC |
30 Vdc |
Output Voltage DC |
0 To 30 Vdc |
Rated Output Current |
170 A |
Output Current |
0 To 170 A |
Rated Output Power |
5100 W |
Associated part numbers for GEN30-170:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: