Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
GEN6-200
TDK Lambda GEN6-200, 0 to 6 VDC, 1200 W, Programmable DC Power Supply
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
TDK Lambda GEN6-200 Programmable DC Power Supply
The TDK Lambda GEN6-200 is a programmable DC power supply designed for industrial automation. This model delivers a rated output voltage of 6 Vdc and a rated output current of 200 A. It provides a rated output power of 1200 W with a typical efficiency of 79 percent. The model supports resistor-based programming for voltage and current. The voltage resistor programming uses a 0 to 5 or 10 kilohm scale with 1 percent accuracy. The current resistor programming maintains accuracy within 1.5 percent of rated output current.
The output voltage on the GEN6-200 power supply can be programmed from 0 to 6 Vdc. The output current can be set anywhere from 0 to 200 A. This adjustable range supports precise control for varied automation loads. The model measures 422.8 mm in width and 43.6 mm in height for rack mounting. Its depth extends to 432.8 mm to house internal components and cooling. The unit has a typical weight of 8500 grams in standard configuration.
The GEN6-200 Programmable DC Power Supply features overcurrent protection rated from 0 to 105 percent of constant current. An OCP foldback function shuts down the output when the supply switches from CV to CC mode. This foldback behavior is user selectable for specific applications. The overvoltage protection on the model causes an inverter shutdown when triggered. The unit resets manually via AC input by recycling the OUT button or communication port. Its OVP trip point ranges from 0.5 V to 7.5 V.
The GEN6-200 power supply includes over-temperature protection for internal components. Users can select either latched or non-latched response modes. This setting helps maintain safe thermal performance during continuous operation. The voltage programming on the power supply spans 0 to 100 percent using 0 to 5 V or 0 to 10 V signals. The accuracy and linearity remain within 0.5 percent of rated output voltage. The current programming follows the same signal range with accuracy within 1 percent of rated output current. The enable/disable function on the model uses a dry contact with a 6 V maximum input. The local and remote analog control switches through electrical signals or open and short contact states.
| Model | GEN6-200 |
|---|---|
| Manufacturer | TDK Lambda |
| Part Type | Programmable DC Power Supply |
| Current Ripple Noise | 0.4 Arms 5 Hz to 1 MHz |
| Rated Output Power | 1200 W |
| Output Current | 0 To 200 A |
| Voltage Ripple Noise | 0.008 Vrms, 5 Hz to 1 MHz |
| Efficiency | 79% Typical |
| Rated Output Current | 200 A |
| Output Voltage DC | 0 To 6 VDC |
Associated part numbers for GEN6-200:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
