Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
TDK Lambda PFE500F-12, 504 W Output Power, Single-Phase Input, AC-DC Power Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
TDK Lambda PFE500F-12 AC-DC Power Module
The TDK Lambda PFE500F-12 is an AC-DC power module designed for industrial automation applications. This power module converts single phase AC input voltage into a regulated 12 Vdc output for industrial loads. The power module delivers up to 504 W of maximum output power for demanding loads. This module suits PCB mount applications requiring compact and reliable power conversion designs. The Power Module supports remote sense functionality to compensate for voltage drops along cables. The remote on/off control is available on the model where a high signal enables the output. The parallel operation is supported on the module in active mode for increased capacity. Multiple PFE500F-12 power modules can be combined in parallel to meet higher load demands.
The module measures 70 mm in width and 122 mm in nominal depth. Its nominal height of 12.7 mm makes it suitable for low profile installations. The typical weight of the module is approximately 300 grams. The PFE500F-12 AC-DC Power Module operates across a baseplate temperature range from - 40 to + 100 degrees Celsius. The operating humidity range for the module spans from 20 to 95 percent non condensing. The storage temperature limits for the model match its operating range for flexible deployment. This module withstands operating altitudes of up to 3000 meters above sea level reliably. The module withstands isolation voltages of 2500 Vac from input to baseplate for one minute.
The power module accepts a single phase input range from 85 to 265 Vac. This wide input voltage range allows it to operate across various global power grid standards worldwide. The module operates with a typical efficiency rating of 83 percent under load. This efficiency level helps reduce heat generation and supports the conduction cooled design overall. The line and load regulation for the model output remain within 48 mV under varying load conditions. The overvoltage protection on the module activates between 125 and 145 percent of rated output voltage. The overcurrent protection engages between 105 and 140 percent with automatic recovery function. The PFE500F-12 also includes overtemperature protection to safeguard internal components during continuous operation.
| Model | PFE500F-12 |
|---|---|
| Manufacturer | TDK Lambda |
| Part Type | AC-DC Power Module |
| Maximum Output Power | 504 W |
| Output Voltage Range DC | 9.6 To 14.4 Vdc |
| Input Type | Single-Phase |
| Maximum Output Current | 42A |
| Rated Output Voltage DC | 12 Vdc |
| Efficiency | 83% Typical |
| Input Voltage Range AC | 85 To 265 Vac |
Associated part numbers for PFE500F-12:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: