Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Keysight/Agilent E1469A, 64 Channels, 4x16 Topology, Relay Matrix Switch
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Keysight/Agilent E1469A 4 x 16 Relay Matrix Switch
The E1469A from Keysight/Agilent is a C size single slot register based VXI module designed for relay matrix switching. It features a 64 channel two wire relay component card natively configured in a 4 x 16 matrix topology. The model includes a terminal block that provides structured signal routing across all 64 crosspoints. The matrix switch is designed to switch both high and low signals independently on each individual crosspoint. The module accepts a maximum DC voltage of 220 V and an AC rms voltage of 250 V. The per channel current capacity is rated at 1 Adc or ac rms for supply voltages below 30 Vdc/rms. For voltages below 220 Vdc/rms, the maximum per channel current is 0.3 Adc or ac rms. These per channel current ratings apply exclusively to resistive and non inductive load configurations for proper operation.
The maximum power dissipation per module is fixed at 40 VA for safe and continuous operation. The Relay Matrix Switch delivers a maximum thermal offset of 7 μV per channel on the differential Hi Lo path. The initial closed channel resistance per channel is specified at less than 1.5 Ω at first installation. This per channel resistance value remains reliably below 3.5 Ω for switching accuracy at end of life. The insulation resistance of the matrix switch between any two points is rated at 5 x 10? Ω at ≤ 40 °C and ≤ 95 % RH. This same 5 x 10? Ω insulation value is also maintained at conditions of ≤ 25 °C and ≤ 40 % RH. The model achieves a minimum bandwidth of 10 MHz measured at the - 3 dB reference level. The typical bandwidth performance reaches 25 MHz under matched 50 Ω source and load impedance conditions.
The channel to channel crosstalk performance of the Keysight/Agilent E1469A at frequencies below 10 kHz is rated at less than - 90 dB typically. This crosstalk isolation level ensures consistent signal integrity across all active channels within the matrix.
| Model | E1469A |
|---|---|
| Manufacturer | Keysight |
| Legacy Manufacturer | Agilent |
| Part Type | Relay Matrix Switch |
| Number of Channels | 64-Channel Two-Wire Relay |
| Component Card | Same As E1460A |
| Terminal Block | Included |
| Matrix Topology | 4×16 Matrix Topology |
| Crosspoint Switching | High And Low On Each Crosspoint |
| Daisy-Chain Cable | E1468-80002 |
| Multiple Module Connection | Interconnected With E1468-80002 Daisy-Chain Cable |
Associated part numbers for E1469A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: