Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Agilent M9370A, 300 kHz to 4 GHz, SMA and SMB Connectors, PXI Vector Network Analyzer
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Agilent M9370A PXI Vector Network Analyzer
The Agilent M9370A PXI Vector Network Analyzer is an integrated measurement instrument designed for precise RF tasks. The unit operates from 300 kHz to 4 GHz with stable performance across its defined bandwidth. It supports dynamic range values specified as greater than 114 dB at 9 GHz. The PXI VNA system also meets requirements stating dynamic range greater than 110 dB at 20 GHz. It maintains trace noise below 0.003 dB during calibrated operation. The unit provides sweep speeds from 18 to 33 msec across 401 defined measurement points.
The M9370A analyzer delivers maximum leveled power up to +7 dBm for consistent excitation. The stability specification reaches 0.005 dB per degree Celsius across the supported frequency range. The internal frequency reference maintains typical accuracy of +/- 1 ppm under standard conditions. The reference aging rate remains below 3.5 ppm/year across the instrument lifecycle. The unit provides temperature stability of ±1 ppm from 0 to 55°C. The system impedance is 50 Ohm nominal and supports 75 Ohm using an appropriate adapter. It operates within environmental temperatures centered at 25°C ±5°C.
The vector network analyzer is designed for use with the high performance embedded controller. Supported operating systems include Windows 7 and Windows Vista SP1 and SP2 in both architectures. The system requires a minimum dual core processor running at 1.5 GHz. The recommended processor capacity reaches 2.4 GHz for improved throughput during demanding workflows. The M9370A's memory requirement is 8 GB with 1 GB minimum supported. Installation requires 1.5 GB of available hard disk space for complete deployment. The unit needs 60 minutes of warm up time to achieve full thermal stability. The RF connector configuration includes RF-In and RF-Out supporting primary measurement paths. Additional interfaces include LO-In and LO-Out enabling external frequency control arrangements. The physical connectors include 3.5 mm female SMA female and SMB female options.
The enclosure features intrusion protection rated at IP30 according to IEC/EN 60529. The architecture of Agilent M9370A PXI network analyzer maintains consistent linear response which enhances repeatability across extended analysis cycles. The analyzer enables scalable expansion which assists complex system verification arrangements requiring distributed measurement nodes. The system processes collected data efficiently enabling improved workflow efficiency during dense validation tasks.
| Model | M9370A |
|---|---|
| Manufacturer | Agilent / Keysight |
| Part Type | PXI Vector Network Analyzer |
| Frequency Range | 300 kHz to 4 GHz |
| Sweep speed | 18–33 ms across 401 points |
| Maximum Leveled Output Power | Up to +7 dBm |
| Amplitude Stability | 0.005 dB/°C up to 4 GHz |
| Operating Environment | 25 °C ±5 °C |
| Required Controller | PXIe embedded controller |
| Warm-up Time | 60 minutes |
Associated part numbers for M9370A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: