E2926A

Request for Availability

Keysight/Agilent E2926A, 64 Bit, 24 Patterns, PCI Exerciser and Analyzer

Rated 4.7/5  |  15 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

E2926A Keysight PCI Exerciser and Analyzer | Request a Quote | Image
E2926A Keysight PCI Exerciser and Analyzer | Request a Quote | Image
E2926A New
E2926A Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the E2926A

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
Check Availability Get Current Lead Time

Keysight/Agilent E2926A PCI Exerciser and Analyzer

The Keysight E2926A is a fully programmable, 33 MHz PCI exerciser/analyzer card that operates as both a controllable master and target and includes full support for 64-bit transactions. The card validates bus operation under realistic operating conditions (e.g., real-world traffic) and extreme conditions (corner-case timing) as well as supports PCI Specification Revision 2.1. Engineers utilize the E2926A to generate specific traffic patterns on the bus while analyzing response patterns. As such, engineers can quickly identify issues within chipset bring-up, arbitration logic, and data integrity.

In addition to its ability to capture 64 K traces of PCI state logic, the E2926A's onboard hardware also features 512 KB of onboard data memory. The E2926A captures all bus signals, decoded protocol states, and/or external trigger input signals in time alignment. The twenty-four pattern terms are used to monitor address ranges, command codes, and handshake signal combinations. These twenty-four pattern terms feed into a sixty-four level trigger sequencer. The onboard real-time protocol checker verifies adherence to fifty-three rules based on PCI Specification Revision 2.1. When an error occurs during the verification process, the E2926A triggers a trace and logs the error. Each rule may be masked so that it does not cause a failure if an error occurs. In addition, each rule may be assigned to one of eight dedicated counters. Each counter measures a different parameter such as retries, idle cycles, or burst length. Additionally, the onboard data compare engine identifies when a comparison between expected and actual data values indicates a difference. The onboard CPU controls autonomous execution of test sequences, allowing engineers to perform standalone stress tests.

Engineers utilize the Keysight E2926A via the C-API, RS-232 interface, or optionally via the Keysight E2925 Fast Host Interface at a speed of up to 4 MB/s. Additionally, the Keysight E2920-Series provides a graphical front end that provides a protocol compliance dashboard, performance profiling, and automated regression suites. Industrial automation test beds and semiconductor characterization laboratories utilize this solution to measure bus arbitration latency, verify interrupt handling, and subject PCI bridges to their maximum possible payload. Combining traffic generation capabilities with trace capture abilities to over 4M samples and detecting protocol violations within a single slot significantly reduces time-to-market for PCI-based products to determine the cause of failure.

E2926A Technical Specifications
ModelE2926A
ManufacturerKeysight/Agilent
Part TypePCI Exerciser & Analyzer (32/64 bit, 33 MHz)
Bus Width / Clock32/64-bit, 33 MHz
On? Board Data Memory512 KB
State Analyzer Trace64 K (4 M optional)
Sequencer Depth64 levels
Pattern Match Terms24
Real? Time Protocol Check53 rules, maskable
Lossless Counters8. virtually infinite depth
External Trigger Inputs12 lines

Associated part numbers for E2926A:

Delivery:

Free FedEx or UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

D2926A, EW926A, E292YA, E2926W, E2926X

Why Buy From Apex Waves:

Video thumbnail for Apex Waves Unboxing Experience Video