Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
N5341A
Keysight/Agilent N5341A, 5 Unidirectional Link Pairs, N2X Chassis Platform, Test Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Keysight/Agilent N5341A Test Module
The N5341A Base Station Link Test Module from Keysight (formerly from Agilent) offers individual link-layer testing of OBSAI baseband, RF, and Remote RF Modules within the modular N2X chassis. It performs the necessary tests to ensure all RP3-01, RP3, RP1 & Ethernet interface functions are working properly and allows engineers to identify and correct communications problems prior to system integration. The N5341A can be configured to simulate two separate uni-directional links (up to four) at speeds ranging from 1x through 4x with deterministic traffic generation and also supports fully configurable RP3 and RP3-01 frame transmission so as to allow maximum flexibility in controlling payload IQ samples and control messages.
The N5341A is capable of generating RP1 synchronization bursts with highly accurate timing specifications and capturing incoming RP1 sequences so as to provide a high level of visibility regarding how each module behaves in the synchronization plane. The N5341A has built-in Ethernet and control message support, which enables engineers to perform testing on every aspect of the management and data fabric of an OBSAI node without requiring additional hardware. The test module can insert link-layer faults, bit errors & protocol exceptions into active links using its error injection features to help measure device robustness. With real-time triggering capabilities, bus activity can be captured at the exact moment a certain event occurs, allowing engineers to quickly determine how different modules recover from faults and what causes intermittent problems, ultimately reducing time required for root cause analysis of baseband processors, remote radio heads, and clock and control modules.
Since the N5341A uses the same scalable N2X platform used in design, verification & system testing phases, it minimizes the amount of equipment purchased during the development process and streamlines test processes. Whether performing early link-layer troubleshooting of a new RP3-01 implementation or simulating large amounts of traffic in multi-module environments, this module provides a consistent, future-ready approach to testing OBSAI-based base stations. Its versatility in emulating both module types (baseband, RF & remote RF units) and clock & control modules ensure long-term protection for test investments. Complete configuration of RP3/RP3-01 frames & link layer emulation for baseband, RF modules & CCM provides engineers with comprehensive test capabilities for distributed base station development.
| Model | N5341A |
|---|---|
| Part Type | OBSAI link test module |
| Manufacturer | Keysight |
| Legacy Manufacturer | Agilent |
| Host Platform | N2X chassis |
| OBSAI Interfaces | RP3-01, RP3, RP1, Ethernet |
| Max. Unidirectional Link Pairs | 5 pairs |
| Link Speeds | 1x, 2x, 4x |
| RP3/RP3-01 Frame Config | Programmable IQ/control |
| RP1 Sync Burst | Generation; capture |
| Error Injection | Bit errors, faults, exceptions |
| Triggering | Event-triggered capture |
Associated part numbers for N5341A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
