M9164B

Request for Availability

Keysight/Agilent M9164B, 2 Wires, 16 Ports, 256 Channels, PXIe 2 x 16 Switch Matrix

Rated 4.9/5  |  13 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

M9164B Keysight PXIe 2 x 16 Switch Matrix | Request a Quote | Image
M9164B Keysight PXIe 2 x 16 Switch Matrix | Request a Quote | Image
M9164B New
M9164B Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the M9164B

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
Check Availability Get Current Lead Time

Keysight/Agilent M9164B 2X16 PXIe Switch Matrix

The Keysight M9164B solid-state switch matrix has a 2-slot PXIe footprint. It can provide a 2-input by 16-output crossbar configuration at frequencies ranging from 300 kHz to 9 GHz. The module will route your RF and microwave signals using the fastest solid-state switches available today, and these switches have an extremely long cycle life, making them ideal as the heart of any Automated Test System (ATS) for routing your RF/microwave signals. All ports on the M9164B that do not have a signal routed to them will be terminated internally to 50 Ohm to maintain consistent impedance and signal integrity throughout all setups.

When you integrate the Keysight M9164B directly with their M980xA PXIe Vector Network Analyzers (VNAs), it transforms the M9164B into a multi-port VNA engine, removing the need for additional patch panels and complicated cabling. When you pair the M9164B with a VNA capable of handling multi-port measurements, you can simultaneously measure multiple Devices Under Test (DUTs) or measure the S-parameter performance of a multi-port antenna in a single automated sweep, increasing your throughput in high-volume manufacturing. In addition to measuring multiple DUTs or measuring multi-port antennas, this type of system also provides an excellent method to validate front-end modules (FEMs).

You control the M9164B via either the provided Soft Front Panel or one of several industry-standard IVI drivers, allowing you to quickly add the M9164B to your existing test executive environment. Additionally, built-in temperature stabilization ensures repeatable measurements over extended periods of time. Finally, due to the M9164B's dense solid-state switch architecture and design, it provides very high channel-to-channel isolation, which reduces crosstalk in high-density ATS environments. As previously mentioned, the full crossbar capability of the M9164B allows each of the two inputs to be connected to any of the sixteen possible outputs. Therefore, if you need to adjust your test configuration from one setup to another, the M9164B does so instantly without requiring any physical reconfiguration. The elimination of having to physically reconfigure the connections greatly increases the efficiency of your ATS configurations.

Together with the extensive range of frequency capabilities, small size, high number of ports per PXIe card, and ability to seamlessly interface with Keysight VNAs, the M9164B provides a highly effective solution for 5G massive MIMO production testing/validation, antenna characterization, and multi-site RF component testing, where the key factors include high-speed automated switching and reliability in large-scale manufacturing applications.

M9164B Technical Specifications
ModelM9164B
Part TypePXIe 2X16 Solid-State Switch Matrix
Frequency Range300 kHz – 9 GHz
Switch TopologyFull crossbar, 2 in / 16 out
Simultaneous RF Paths2 active at any time
Idle Port Condition50 Ω internal termination
Switch ElementSolid state (FET)
Cycle LifeUltra-long lifetime rating
Crosstalk ControlHigh port-to-port isolation
Module Size2-slot PXIe

Associated part numbers for M9164B:

Delivery:

Free FedEx or UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

N9164B, L9164B, M9Q64B, M91U4B, M9164V

Why Buy From Apex Waves:

Video thumbnail for Apex Waves Unboxing Experience Video