Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Keysight/Agilent M9806A, Compact, Single Slot, 5-Parameter Measurement, PXIe Vector Network Analyzer
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Keysight/Agilent M9806A PXIe Vector Network Analyzer
Keysight’s M9806A PXIe Vector Network Analyzer (VNA) has been designed as a compact, single-slot unit that offers two-port S-parameter measurement capability over a range of 100 KHz to 32 GHz. Due to the fact that this PXIe module contains its own source and receiver units, it allows for accurate, independent characterization of passive components such as capacitors and resistors, amplifiers, frequency converters, etc., on a test bench. This does not require the space needed by a bench-top unit.
Because each PXIe VNA module is capable of providing a phase-coherent test port, a large number of modules may be placed into a single PXIe chassis. Therefore, engineers are able to create a multiport vector network analyzer with up to 50 fully synchronized ports. Simultaneous cross-bar S-parameter measurements using all ports are possible. Additionally, because the entire multiport system is phase coherent, full multiport error correction can also be implemented through use of the S95551B software. Thus, engineers are able to significantly reduce test times when performing tests on complex multiport components. The ability to simply swap out PXIe modules rather than manually reconnecting test equipment greatly facilitates the task of measuring complex multiport networks such as antenna arrays, switch matrices, etc.
The specified system dynamic range of the M9806A is 140 dB from 50 MHz to 6.5 GHz. Trace noise is measured at 0.0015 dB RMS. Sweep acquisition time is only 2 milliseconds, allowing for significant increases in productivity during production testing. Directivity, source match, and load match errors are well controlled throughout the frequency band. Reflection and transmission tracking errors are limited to published specifications. Temperature stability is typically 0.005 dB/C, reducing the need to frequently calibrate the equipment.
Common applications for the M9806A will include S-parameter measurement of RF cable assemblies, connectors, filters, duplexers, isolators, and antennas. Active device characterization, including S-parameter measurements of amplifiers, mixers, and frequency converters, will also be common. In addition to these traditional uses for VNAs, signal integrity applications involving impedance profiling and balanced measurements are available options. Optional spectrum analysis capabilities, along with pulsed-RF capabilities, will allow users to apply the M9806A outside of classical VNA functions.
| Model | M9806A |
|---|---|
| Part Type | PXIe Vector Network Analyzer (VNA) |
| Frequency Range | 100 kHz to 32 GHz |
| Built-In Ports | 2-port configuration |
| Dynamic Range | Up to 140 dB |
| Sweep Speed | ~2 ms (201 points, single sweep) |
| Output Power | Up to +10 dBm |
| Trace Noise | ~0.0015 dB RMS |
| Temperature Stability | ~0.005 dB/°C (typical) |
| Internal Sources | 1 integrated RF source |
Associated part numbers for M9806A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: