786849-01 Request for Availability

National Instruments 786849-01 Oscilloscope Probe

Part Number 786849-01 is the identifying part number for the National Instruments CC15010X Oscilloscope Probe. The 786849-01 has a -3 dB bandwidth ranging from DC to 10 MHz. The rise time for the probe is 35 ns or less. The maximum continuous input range for the probe is 150 A while the maximum peak current value is 300 A for non-continuous and 500 A at a pulse width of less than 30 μs. Similarly, the output voltage rate is 0.01 V/A.  Furthermore, the amplitude accuracy is as follows: ± 1.0 % rdg. ± 1 mV up to 150 A, ±2.0% rdg. for 150 A to 300 A peak (considering DC, and 45 to 66 Hz). Moreover, the noise is equivalent to 25 mA rms or less. 

The maximum rated power for the 786849-01 is 5.5 VA within the maximum continuous input range. The rated supply voltage for this probe is  ±12 V ±1 V. The temperature coefficient of sensitivity is ± 2% or less considering a 55 Hz 150 A input within the operating temperature range. In a DC or 60 Hz, 400 A/m magnetic field, the effect of the magnetic field can reach an equivalent to a maximum of 150 mA. 

The 786849-01 is recommended for operation between temperatures of  0 °C to 40 °C at a relative humidity of 80% or less. Likewise, it is designed for indoor use only and should be operated within a maximum altitude of 2000 m. On the other hand, it can be stored between  -10 °C to 50 °C at the same level of relative humidity. There is a 1 year period of guaranteed accuracy for the probe accounting for opening/closing up to 10000 times. 

The diameter of measurable conductors for the 786849-01 is 20 mm and it can measure insulated conductors. The length of the sensor cable is approximately 2 m while the length of the power supply cable is approximately 1 m. The probe weighs 500 g and comes with an instruction manual and a carrying case. It complies with the EN61010 safety and EN61326 EMC standards.