NI-9754 Request for Availability

National Instruments NI-9754 C Series Engine-Synchronous TTL Output Module

The NI-9754 (Part number: 782077-01) gives exclusively controlled 5V transistor-to-transistor logic (TTL) outputs. The user can control channels with custom Boolean client logic for assignments, such as fuel and start summons. The Powertrain Control Device Driver programming gives capacities to motor position following and complex motor synchronous fuel/start charges.

The NI 9754 module comes with a power source that has a 5 V controlled and ground to many digital logics that work inside the model. Also, this instrument requires control from the CompactRIO backplane male high density D-SUB 15-stick (HD15) connector. This CompactRIO 5 V source is dynamic when the CompactRIO or R Series Expansion Chassis is selected. The user can control this instrument mainly at the HD15 connector by associating it to a CompactRIO or R Series Expansion Chassis. NI Powertrain Control modules like this require a hardware supportive network to work. Users cannot utilize the modules autonomously or in association with external gadgets at the backplane HD15 connector

Each TTL output channel has a DO spin to associate with a gadget that acknowledges a computerized order motion from 0 V to 5 V. This additionally enables users to utilize them for orders outside custom driver circuits because it does not permit the user to create an ffi ebb and flow for driving fuel injectors. The eight output channels are inside referenced to COM, so any of the nine COM lines can be used as a kind of perspective for the outer signal. Each channel has a draw down resistor and incorporates overcurrent, overvoltage, and cut off.

NI-9754 Mature Status has been announced by National Instruments, but the module will still be available for purchase and repairs by Apex Waves.