sbRIO-9264 Request for Availability

National Instruments sbRIO-9264 C Series Voltage Output Module

Featured with 16 analog output channels, the NI sbRIO-9264 (Part Number: 781119-01) is a Voltage Output Module from the National Instruments C Series. This module is designed to accommodate a higher channel-count system and can generate simultaneous updates at rates up to 25/kS/s/channel. The NI sbRIO-9264 is compatible with a variety of Single-Board sbRIO Controllers. This Voltage Output Module is offered with a 37-pin D-SUB front connector.

The NI sbRIO-9264 comes equipped with a dedicated digital-to-analog converter for each one of its sixteen channels. Moreover, each channel has integrated short-circuit and overvoltage protection. The sbRIO-9264 Voltage Output Module supports a low-power sleep mode to consume minimum power resources while not communicating with other systems. The DACs incorporated in this module are 16-bit, string digital-to-analog converters. In its default configuration, the outputs of the NI sbRIO-9264 initiate and power down with 0V. This C Series Voltage Output Module is non-enclosed, which means it is designed for OEM applications. 

As far as its power requirements are concerned, this module draws 1 watt of maximum current while operating in active mode and as low as 25 μW is required in sleep mode. The National Instruments sbRIO-9264 Voltage Output Module has an analog output voltage range of -10 V to 10 V. This module can drive up to 4 mA current. The analog outputs incorporated in this module offer up to 60 VDC channel-to-earth ground isolation on a continuous basis. This Voltage Output Module is a Measurement Category I module and can withstand up to 1000 Vrms surge voltages.