Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
cDAQ-SL1100 Bundle
cDAQ-SL1100, 1-Slot USB Chassis, Precise Data Acquisition, Strain and Load Measurement Bundle
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments cDAQ-SL1100 CompactDAQ Strain and Load Measurement Bundle
The National Instruments cDAQ-SL1100 (Part Number: 868018-01) is an all-in-one strain and load measurement bundle designed for high-precision data acquisition from bridge-type sensors. This complete package consists of the cDAQ-9171, a rugged, one-slot, USB-driven chassis, and the special NI-9237, a four-channel simultaneous bridge input module. The package includes those accessories necessary for operation, including RJ50 cables for sensor connection, a USB cable for connection to the computer, a quarter bridge accessory (NI-9945), and a desktop mounting kit.
The core of the cDAQ-SL1100 package is the chassis (cDAQ-9171) that provides both the communication backbone and the power needed through a single USB 2.0 Hi-Speed connection with the host computer. This small and rugged chassis is designed for portable or benchtop use in demanding industrial environments, working over a wide temperature range. It is configured for a C Series module (in this case NI-9237) and incorporates sophisticated timing features, giving clock accuracy of 50 ppm and resolution of 12.5 ns, both of which are necessary and useful for synchronized measurements. The chassis also has the benefit of safety and EMC certification for reliable operation in industrial environments.
The NI-9237 module is the analytical core of the cDAQ-SL1100 package, providing the specialized type of signal conditioning required for strain gauges and load cells. This module provides four separate analog input channels capable of simultaneous sampling at 50 kS/s. per channel with 24-bit resolution, with no phase differences between the channels, allowing precise dynamic measurements, as well as being able to utilize quarter, half and full bridge arrangements inclusively. The module allows the application of programmable internal excitation voltages of up to 10 V. Key features include 60 VDC channel-to-earth ground isolation and 1,000 Vrms transient protection, increasing the safety of the operator and giving superb common-mode rejection in electrically noisy environments. Advanced features available for use include remote sensing and software-controlled shunt calibration for automatic corrections for errors generated due to lead wire resistances.
The cDAQ-SL1100 package is ideally suited for structural health monitoring, materials testing and mechanical validation applications in research laboratories, manufacturing quality control and process automation applications. The package thus then serves as a high-fidelity, dedicated, and high-performance system for the accurate conversion of applied physical phenomena, such as force, pressure and weight, into precise, reliable and high-fidelity digital data.
| Model | cDAQ-SL1100 Bundle |
|---|---|
| Part Number | 868018-01 |
| Part Type | CompactDAQ Strain/Load Measurement Bundle |
| Channels | 4 Simultaneous Strain/Bridge Inputs |
| Sampling Rate | 50 kS/s per Channel |
| Resolution | 24-Bit Delta-Sigma ADC |
| Input Range | ±25 mV/V |
| Excitation Voltage | 2.5 V, 3.3 V, 5 V, or 10 V selectable |
| Isolation | 60 VDC Continuous, 1,000 Vrms Transient |
| Chassis | 1-Slot USB cDAQ-9171 |
Associated part numbers for cDAQ-SL1100 Bundle:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
