Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
SH160DIN-Bare Wire
SH160DIN-Bare Wire, 160 Pin Female DIN and 6 Pin Male Bare Wire Connector Types, NI Bare Wire Switch Cable
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments SH160DIN-Bare Wire Switch Cable
National Instruments SH160DIN-Bare Wire (Part Numbers: 782417-01, 781090-03) cable is made to make signal routing between instruments and devices-under-test (DUT) easier. This cable is specifically made to work with the NI PXI-2520, PXI-2521, PXI-2522, PXI-2523, and PXI-2510, enabling accurate and dependable signal routing.
This cable includes a 160-Pin female DIN connector on one end, which connects to the NI PXI-252x series or NI PXI-2510. The other end features multiple connection options, including four 50-pin female D-SUB connectors, a second 160-Pin DIN connector, and eight bundles of unterminated, tinned, and stripped wires (labeled P1-P8).
With a maximum voltage rating of 150 V (CAT I) and a maximum current per pin of 2 A, the SH160DIN-Bare Wire cable prioritizes dependability and safety during operation. It is imperative to remember that, in order to protect user safety, this cable should not be connected to mains supply circuits.
Temperatures for operation and storage are, respectively, 0 °C to 55 °C and -20 °C to 70 °C. The cable is suitable for indoor use only and can operate at altitudes of up to 2,000 m. It also meets with safety regulations for electrical equipment as specified by IEC, EN, UL, and CSA, among others (61010-1, 61010-1, 61010-1).
This cable must be used with shielded accessories in order to comply with Electromagnetic Compatibility (EMC) regulations. The flexibility and compatibility of the SH160DIN-Bare Wire cable are further improved by third-party accessories including 50-position male D-SUB connectors at a right angle and VARIOFACE modules with screw connections and 50-position D-Subminiature male connectors.
| Model | SH160DIN-Bare Wire |
|---|---|
| Part Number(s) | 782417-01, 781090-03 |
| Manufacturer | National Instruments |
| Connector Type | 160-Pin DIN Female |
| Compatible Modules | PXI-2510, PXI-2520, PXI-2521, PXI-2522, PXI-2523 |
| Additional Connectors | Four 50-Pin Female D-SUB, Second 160-Pin DIN |
| Unterminated Wires | Eight bundles (P1-P8) |
| Maximum Voltage | 150 V (CAT I) |
| Maximum Current Per Pin | 2000m |
| Operating Temperature | 0 °C to 55 °C |
| Storage Temperature | -20 °C to 70 °C |
| Relative Humidity | 5% to 85%, noncondensing |
| Pollution Degree | 2 |
| Recommended Use | Indoor |
Associated part numbers for SH160DIN-Bare Wire:
National Instruments SH160DIN-Bare Wire Frequently Asked Questions
Question: What's the SH160DIN-Bare Wire's functionality?
Answer: It facilitates the easy signal routing between instruments and devices-under-test.
Question: What models are compatible with the wire?
Answer: The wire was made specially NI PXI-2520, PXI-2521, PXI-2522, PXI-2523, and PXI-2510.
Question: What connectors does the SH160DIN-Bare Wire use?
Answer: For the NI PXI-252x series or NI PXI-2510 series, it uses a 160-Pin female DIN connector on one end, other end features multiple connection options. This includes four 50-pin female D-SUB connectors, a second 160-Pin DIN connector, and eight bundles of unterminated, tinned, and stripped wires.
SH160DIN-Bare Wire PDF Manuals
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
