Modular Systems > National Instruments > R Series

PCIe-7820R
PCIe-7820R alt2
PCIe-7820R New small
PCIe-7820R Refurb small

Pictures shown are a representation. Actual item may vary if no part number is provided on quote request.

Same Day Calibration Available

2-3 Year Warranty Included

Free Ground Shipping

Or speak to a sales representative for additional information:

PCIe-7820R Request for Availability

PCIe-7820R, 128 DIO, Digital Reconfigurable I/O Device

Rated 4.81/5 | 20 ratings

Please fill out the form below to send in your quote request and a representative will contact you with a formal quote. View blog post on Model Name vs. Part Numbers

+Add more parts

Prefer to send a text message?

Text your name, e-mail, and parts to quote to:   1-919-809-5227

National Instruments PCIe-7820R Digital I/O Reconfigurable Device

The Digital Reconfigurable I/O Device NI PCIe-7820 (Part number: 785361-01) in DIFF input mode, measures the distinction between the positive and negative sources of info. DIFF input mode is perfect for estimating ground-referenced signals from different gadgets. When utilizing DIFF input mode, the info signal associates with the positive contribution of the instrumentation enhancer and its reference signal, or return, interfaces with the negative contribution of the instrumentation speaker.

The PCIe-7820 can utilize differential info associations for any channel that meets any of the accompanying conditions. The input signal is low level (under 1 V), the leads associating the signal to the NI PCIe-7820R are more prominent than 3 m (10 ft), the input flag requires a different ground-reference point or return signal, and the signal drives travel through noisy situations.

Differential signal associations lessen commotion gain and increment regular mode clamor dismissal. Differential signal associations also permit input signals to float inside the normal mode breaking points of the amplifier. If the user does not utilize the resistors and the source is really drifting, the source probably will not stay inside the normal mode flag scope of the instrumentation enhancer, causing mistaken readings. The user should reference the source to AIGND by interfacing the positive side of the flag to the positive contribution of the instrumentation intensifier and associating the negative side of the flag to AIGND and to the negative contribution of the instrumentation speaker without resistors.

This association functions admirably for DC-coupled sources with low source impedance, under 100 Ω. For bigger source impedances, this association leaves the differential signal way essentially out of adjustment. Commotion that couples electrostatically onto the positive line does not couple onto the negative line since it is associated with ground.

ModelPCIe-7820R
ManufacturerNational Instruments
SeriesR Series
Part Number785361-01 
TypeDigital Reconfigurable I/O Device
FPGA TypeKintex-7 160T
Number of Flip-flops202,800
Number of DSP48 Slices600
Embedded Block RAM11,700 kbits
Digital I/O128
Number of DMA Channels16
Timebase40 MHz, 80 MHz, 120 MHz, 160 MHz, or 200 MHz
I/O Connector4 × 68-pin VHDCI
Power Requirements+3.3 VDC, 12 VDC - 03 A, 02 A
Dimensions7.1 in. × 5.0 in. × 0.9 in.
Weight0.35 lb.
Software DriverNI-RIO
Warranty2-3 Year Warranty
PCIe-7820R ManualUser Manual and Maintenance Manual Available for Download
PriceContact a sales representative for a quote.

Associated part numbers for PCIe-7820R:

National Instruments PCIe-7820R Frequently Asked Questions

 

Question: What do I need to do before using the PCIe-7820R for the first time?

Answer: Before using the PCIe-7820R, you must install LabVIEW 2017 or later, LabVIEW FPGA Module 2017 or later, and NI R Series Multifunction RIO Device Drivers May 2017 or later.

 

Question: Can I install the NI PCIe-7820R into my PCI slot?

Answer: You cannot install PCI Express devices, such as the NI PCIe-7820R in PCI slots.

 

Question: How can I verify that my system properly recognizes the PCIe-7820R?

Answer: You can verify that the system recognizes the PCIe-7820R by using Measurement & Automation Explorer (MAX). After launching MAX, click on Devices and Interfaces and look for the device.

Driver Downloads for PCIe-7820R

OS Compatibility: ...

Download Version

Delivery:

UPS, FedEX and DHL – Free Ground on all orders

Overnight, Next Day Air or Expedited shipping options available

International delivery available

Same day shipping for in-stock on location

Warranty:

All of our products are covered by our Apex Waves Warranty.

3 Year Warranty - New Surplus Parts

2 Year Warranty - Refurbished Parts

Returns:

No hassle return policy.

Dedicated customer service team.

Payment:

Authorize.net Visa Master Card American Express BB&T Better Business Bureau Dun & Bradstreet

Quick Quotes:

Receive Price & Availability Today!

Calibration:

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Repair:

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

PXIE-7820R, PDIE-7820R, PCIR-7820R, PCIE-7U20R, PCIE-7820F
Why Buy From Apex Waves: