Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Pickering 40-852-018, 8-Channel, 2 PXI Slots, MEMS Fiber Optic Multiplexer
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Pickering 40-852-018 MEMS Fiber Optic Multiplexer
The Pickering 40-852-018 is an eight channel MEMS fiber optic multiplexer designed for precise optical routing. It uses advanced MEMS switching elements that ensure highly repeatable optical performance and it provides a single eight to one switching architecture that supports complex automation requirements. This configuration allows controlled redirection of optical signals across multiple test paths within integrated automation platforms. The 40-852-018 module operates with single mode 9/125 fiber which ensures stable transmission across extended wavelength ranges. Its supported wavelength span from 1240 to 1640 nm to enable reliable use in diverse optical systems. This unit maintains a typical insertion loss of 1.5 decibels across its switching channels. Its APC connector interface ensures a minimum return loss of 60 decibels for improved signal integrity.
The device 40-852-018 ensures polarization dependent loss not exceeding 0.05 decibels under all rated conditions. Its repeatability specification of 0.01 decibels supports consistent measurement results and it maintains crosstalk levels below -60 decibels to protect sensitive measurement signals. The unit’s thermal stability specification limits insertion loss variation to 0.2 decibels across the defined range. The MEMS fiber optic 40-852-018 multiplexer withstands optical input power levels up to 300 mW during operation and its switching mechanism achieves a maximum switching time of 1 ms that supports rapid test cycles. Its design offers 500 switching actions per second and its expected operational lifetime exceeds 1 billion cycles due to robust MEMS based construction.
This device occupies two PXI slots and it uses a 33 MHz 32 bits PXI backplane interface for reliable module communication. It come with FC APC connectors on the front panel which ensure secure fiber terminations. This module weighs 0.8 kg wand it requires a 5 V regulated power supply with a typical current consumption of 220 mA. The Pickering 40-852-018 MEMS fiber optic multiplexer module meets PXI specification of 2.2 without implementing trigger or local bus features. It complies with CE requirements including low voltage safety and electromagnetic compatibility standards. The product supports integration within PXI CompactPCI and compatible PXIe hybrid chassis configurations. Its design enables precise optical routing functions essential for complex automated measurement and control systems.
| Model | 40-852-018 |
|---|---|
| Manufacturer | Pickering |
| Part Type | MEMS Fiber Optic Multiplexer |
| Connectors | FC/APC |
| Fiber Type | Single-mode 9/125 |
| PXI Slot Requirement | 2-slot 3U PXI (CompactPCI) module |
| Wavelength Range | 1240–1640 nm |
| Return Loss | ≥60 dB |
| Polarization Dependent Loss (PDL) | ≤0.05 dB |
| Cycle Rate | 500 operations/sec |
Associated part numbers for 40-852-018:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: