Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Pickering 40-513-022, 2-Pole, 68-Pin Micro-D Connector, Reed Relay Matrix Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Pickering 40-513-022 Reed Relay Matrix Module
The Pickering 40-513-022 is a 2-pole 24x4 reed relay matrix module that offers very high-density signal routing for automated test equipment (ATE) and data acquisition systems. The matrix module consists of 24 rows and 4 columns to attain 96 cross points, with dual-wire connections for applications that require differential signals or independent signal paths at every crosspoint. The matrix module contains ruthenium-sputtered reed relays manufactured by Pickering Electronics, which offer stable contact resistance, low thermal offset (<15µV), and long operational life (1 billion cycles minimum at low power and >5 billion cycles at full load).
The 40-513-022 is rated for a maximum switching voltage of 150VDC/100VAC, a maximum 1.2A current, and a maximum 20W power, which provides broad utility to many switching applications. It can operate at speeds under 0.5ms, and with typical path resistance of below 800mΩ when closed, and isolation in excess of 10¹ Ω when open. The module is designed to be mounted into a 3U PXI or LXI chassis using a 32-bit backplane connector and connects to the external world through a front panel 68-pin micro-D connector. The power requirements are a +5V supply at a maximum of 400mA (average 280mA). The 40-513-022 meets the PXI Specification 2.2 and CE directives for safety (EN61010-1) and electromagnetic compatibility (EMC) (EN61326-1).
The 40-513-022 is designed with scalability in mind, allowing it to be connected together with more modules, to create larger matrices by daisy chaining common signals together. It comes with VISA, IVI, and kernel drivers for Windows that facilitate connections and integration with LabVIEW, MATLAB, and many other development environments. The module is manufactured to rugged standards, allowing it to be operated in temperatures from 0°C to +55°C and altitudes up to 5000m.
The module is finally suitable for application in functional testing, sensor simulation, and multiplexing in industrial or aerospace systems. The 40-513-022 is compatible with Pickering’s eBIRST diagnostics, which allows for rapid identification of faults across a switch path, and with the software Switch Path Manager for automated signal routing.
| Model | 40-513-022 |
|---|---|
| Model Type | PXI Matrix Module |
| # Poles | 2 Poles |
| Relay Type | Reed Relay |
| Matrix Configuration | 24 Rows × 4 Columns |
| PXI Slot Occupancy | Single 3U Slot |
| PXI Backplane Interface | 32-Bit, 33 MHz Bus |
| Front-Panel Connector | 68-Pin Female Micro-D |
| Maximum Switching Voltage | 150 V DC / 100 V AC |
| Maximum Carry Current | 1.2 A |
| Initial Contact Resistance | < 0.8 Ω |
| Relay Endurance | > 1 × 10â¹ Operations (Low-Power Load) |
Associated part numbers for 40-513-022:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: