Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Pickering 41-720-02-11-12-0, One Slot, 4 Outputs, Isolated Power Supply Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Pickering 41-720-02-11-12-0 Isolated Power Supply Module
The 41-720-02-11-12-0 isolated power supply module by Pickering is used to provide regulated and isolated output rails. The module uses a one slot format that integrates isolated voltage generation hardware. The design supports PXI systems that require stable power rails under strict conditions. The isolated power unit 41-720-02-11-12-0 utilizes controlled distribution of fully floating regulated voltages for critical systems. It delivers up to 4 regulated outputs that operate independently. The design works with 5V rails that maintain reliable performance in precision instrumentation platforms.
The 41-720-02-11-12-0 power supply contains 12V rails that give stable energy for sensitive loads in modular systems. The unit supports bipolar configurations that combine regulated outputs to reach 24 V. The output architecture isolates all rails from the PXI power supply for system protection. The module supports short circuit protection that safeguards each rail against excessive current events. The 41-720-02-11-12-0 power supply implements thermal protection mechanisms that aids uphold controlled operating temperatures. The design isolates faults at each output to maintain stable operation for remaining channels. The power supply module provides per channel on/off control that helps manage energy distribution in the chassis. The rail control supports flexible integration when operating multiple loads with unique requirements.
The load regulation specification of 1% ensures precise voltage stability during operation. The ±12V option supports 0.625A output current for each regulated channel. The module provides ripple values of 130 mV peak to peak at maximum load conditions. The 41-720-02-11-12-0 isolated power supply supports D type connectors or 1 mm sockets depending on configuration needs. The included VISA drivers support Windows systems that require structured control interfaces. The soft front panel provides accessible configuration management for development and validation tasks. The unit supports 3U PXI chassis that conform to PXI Specification 2.2 mechanical requirements. The unit is compatible with cPCI systems that require stable module level power resources. The backplane interface operates at 33 MHz on a 32-bit architecture that allows stable communication. The Pickering 41-720-02-11-12-0 module omits local bus and trigger features as they are not required. The stable electrical behavior supports repeatable measurement performance across technical installations. The module includes a 2-year warranty that supports long term equipment planning in industries.
| Model | 41-720-02-11-12-0 |
|---|---|
| Manufacturer | Pickering |
| Part Type | Isolated Power Supply Module |
| Module Type | One-slot isolated power supply module |
| Number of Regulated Outputs | Up to 4 independent regulated outputs |
| Maximum Output Current (each channel) | 0.625 A for ±12V option |
| Ripple Voltage (Peak-to-Peak) | 130 mV at maximum load |
| Load Regulation | 1% at minimum 10% load |
| Control Features | Independent power on/off control per output |
| Connector Options | D-Type plug or 1 mm sockets |
Associated part numbers for 41-720-02-11-12-0:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: