Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
41-753-001
Pickering 41-753-001, DC Power Source, Single PXI Slot, Battery Simulator Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Pickering 41-753-001 Battery Simulator Module
Pickering's 41-753-001 is a high accuracy PXI battery simulator that is used to replicate the electrical characteristics of battery-powered handheld devices (cellular phones) for use in automated test systems. As a programmable DC power source, this unit provides controlled input to the device under test. The 41-753-001 fits into a single 3U PXI slot and receives its required power from the PXI backplane. Therefore, no external power supply is needed. Isolated output of the unit will provide a maximum of 6 Volts with a common-mode voltage range of ±50 Volts which allows for the simulation of a floating battery terminal.
As a battery simulator, the 41-753-001 is capable of both sourcing and sinking current. Therefore, the unit is ideal for simulating the operation of the device being tested as well as the circuitry of chargers. The unit has a programmable current sink of up to 0.5 Amps to simulate a battery that is being charged. The 41-753-001 can source up to 2.8 Amps of current and also contains a programmable output resistor of up to 1.15 Ohms to simulate the actual battery impedance. Remote sense connections are available to allow for accurate voltage regulation directly at the device under test. In addition, the Pickering 41-753-001 has the ability to detect when a load is connected to the unit and can therefore protect the system.
Industrial automation and validation labs have been using the 41-753-001 for simulating loads on batteries and charging devices. It has a fast load transient response of 15 microseconds; therefore, it is able to maintain stability during dynamic conditions. The Battery Simulator has integrated monitor pins that can be used to measure the output voltage and current. A full software package is available to support the simulator including VISA and kernel drivers to allow for seamless integration of the unit into your test environment using LabVIEW, MATLAB, or other common development platforms. Due to its programmability, isolation, and integration capabilities, the 41-753-001 is a key component for reliable power simulation in automated production and R&D test systems.
| Model | 41-753-001 |
|---|---|
| Part Type | PXI Battery Simulator |
| Voltage Range | 0 to 6 V |
| Max Output Current | 2.8 A |
| Programmable Current Sink | 0 to 0.5 A |
| Output Resistance Range | 0 to 1.15 Ω |
| Output Isolation | ±50 V Common Mode |
| Voltage Sense | Remote (Configurable) |
| Transient Response | 15 µs (1A to 2A step) |
| Power Source | PXI Backplane (+5V) |
Associated part numbers for 41-753-001:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
