Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
EMS DC Lab Power Supply 0-600V@ 0-8A Variable Digital Regulated
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
TDK Lambda EMS 600-8-2-D Power Supply
The TDK Lambda EMS 600-8-2-D Power Supply has U8 outputs that are "ORed" to provide a PWM signal in 50 KHz. This will be utilized as a clock for the power MOSFET controller IC (U1), spotted on the A200 half-bridge inverter board. With the active interior change, the results of U1 on pins 6 and 11 exchange to offer an acceptable balance transformer unit. They also guarantee that only one transistor is turned on at the same time. This model comes with the XLD4429, an industry standard MOSFET driver, that has been selected to drive the A200 Full Bridge Inverter, due to its high peak top current ability and high speed. The output of the PWM during pins 13 and 16 are exchanging, then fed into the IXLD4429 MOSFET drivers. The IXLD4429 drives the pulse transformer(s), providing 180 degrees out of phase that is needed to keep the diagonally inverse transistors conducting at the same time.
The EMS 600-8-2-D is not difficult to maintain; a regularly scheduled maintenance of once a year is suggested for this EMS power supply. As a minimum, maintenance should consist of a careful cleaning of the interior of the unit and a visual review of the fans and parts on the printed circuit boards.
In this instrument, the zero set for both voltage and current front board analog meters will be spotted on the board meters and is accessible on the front panel. Zero adjustments should be performed with the power removed. For power supplies with analog meters, this alignment should be performed before proceeding to the next step.
The manual for this model is available on the ApexWaves.com website.
| Model | EMS 600-8-2-D |
|---|---|
| Manufacturer | TDK Lambda |
| Series | EMS |
| Type | DC Power Supply |
| Output Voltage | 600 V |
| Output Current | 8 A |
| Frequency | 47-63 Hz |
| EMS 600-8-2-D Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for EMS 600-8-2-D:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: