Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
GEN150-5
TDK Lambda GEN150-5, 750 W, 1U Rack Mount/Benchtop, Programmable DC Power Supply
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
TDK Lambda GEN150-5 Programmable DC Power Supply
The TDK Lambda GEN150-5 delivers a regulated DC output of 150 Vdc at a rated output power of 750 W. The model accepts a wide single-phase AC input voltage ranging from 85 to 265 Vac for universal compatibility. The input frequency support spans 47 to 63 Hz, making the unit suitable for diverse global electrical standards.
The GEN150-5 power supply provides a programmable output voltage from 0 to 150 Vdc at its rated output capacity. The output current of the model is adjustable from 0 to 5 A to accommodate variable load requirements in test environments. A typical power conversion efficiency of 87% significantly minimizes heat generation and reduces overall operational overhead. This efficiency level is especially critical in continuous duty industrial applications requiring stable and sustained power output.
The GEN150-5 power supply is designed to support full continuous operation at 100 % load between 0 and 50 °C. The safe storage is supported across an extended range of -20 °C to 70 °C for nonoperational conditions. The operating humidity is specified between 30 and 90% RH non-condensing, while storage humidity extends to 95% RH. The maximum operating altitude is 10000 ft with a 2 % per 100 m output current derating applied above 2000 m.
The GEN150-5 power supply uses an IEC320 AC inlet connector for its 750 W rated input power connection. The output connectors are wire-clamp type using Phoenix part number FRONT-4-H-7.62. The unit dimensions are 422.8 mm wide by 432.8 mm deep and 43.6 mm in height for 1 U rack installation.
The low output noise is a defining characteristic of the GEN150-5 programmable DC power supply design.
The voltage ripple noise is measured at just 0.01 Vrms across a bandwidth extending from 5 Hz to 1 MHz. The current ripple noise is rated at 0.018 Arms within the same frequency range, ensuring clean, stable output. The standard interfaces on the power supply include RS-232 and RS-485 for direct system integration. The optional connectivity choices include LAN with LXI compliance as well as USB and GPIB communication interfaces.
| Model | GEN150-5 |
|---|---|
| Manufacturer | TDK Lambda |
| Part Type | Programmable DC Power Supply |
| Output Voltage [DC] | 0 to 150 Vdc |
| Rated Output Current | 5 A |
| Output Current | 0 to 5 A |
| Rated Output Power | 750 W |
| Efficiency | 87% Typical |
| Voltage Ripple Noise | 0.01 Vrms (5 Hz to MHz) |
| Current Ripple Noise | 0.018 Arms (5 Hz to MHz) |
Associated part numbers for GEN150-5:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
