HFE1600-24

Request for Availability

TDK Lambda HFE1600-24, AC/DC, Rack-Mount, 1608 W, Front-End Power Supply

Rated 4.8/5  |  12 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

HFE1600-24 TDK Lambda Power Supply | Request a Quote Today | Image
HFE1600-24 TDK Lambda Power Supply | Request a Quote Today | Image
HFE1600-24 New
HFE1600-24 Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the HFE1600-24

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
Check Availability Get Current Lead Time

TDK Lambda HFE1600-24 Front-End Power Supply

The TDK Lambda HFE1600-24 is a front-end power supply within the HFE1600 series. This power supply delivers a nominal output voltage of 24 V to connected loads. The output voltage on the model can be adjusted from 19.2 V up to 29 V. The communication on the power supply is available through an optional isolated PMBus interface with the /S suffix. A plug-in LAN module is also offered as a communication option. The model supports parallel operation of up to 10 units with current sharing.

The HFE1600-24 power supply delivers up to 50 A and 1200 W at low line input from 100 Vac to 132 Vac. At a high line input of 170 Vac and above, the power supply delivers up to 67 A and 1608 W. The line regulation on the output remains within 60 mV across the input voltage range. The load regulation for the model stays within 120 mV from no load to full load. The output ripple and noise on the power supply remain below 240 mV under rated operating conditions. An open collector AC fail signal on the power supply activates when AC input is 85 V to 270 V.

The HFE1600-24 front-end power supply operates from a universal AC input voltage range of 85 V to 265 V. The input frequency for the power supply ranges between 47 Hz and 63 Hz across this voltage band. The maximum input current reaches 12.4 A at 115 Vac and 8.1 A at 230 Vac with inrush below 35 A. The hold-up time exceeds 10 ms at 80 % load on either input. The external load capacitance on the power supply is rated at 1000 uF per ampere of load. The model operates reliably across its full load range without requiring any minimum load.

The overcurrent protection on the HFE1600-24 activates at a minimum of 105% of rated current at low line. At high line input, it activates between 105% and 120% of rated current on the power supply. The overvoltage protection trips at 110% with tracking and resets via AC cycle or remote on/off.

HFE1600-24 Technical Specifications
ModelHFE1600-24
ManufacturerTDK Lambda
Part TypeFront-End Power Supply
Maximum Output Power1608 W
Output Voltage Range: DC19.2 to 29 VDC
Input TypeSingle-Phase
Maximum Output Current67 A
Efficiency90% Typical
Rated Output Voltage DC24 Vdc
Input Voltage Range: AC85 to 265 Vac

Associated part numbers for HFE1600-24:

Delivery:

Free FedEx or UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

HCE1600-24, HFEQ600-24, HFE1T00-24, HFE1600-Q4, HFE1600-2R

Why Buy From Apex Waves:

Video thumbnail for Apex Waves Unboxing Experience Video