69147A

Request for Availability

Anritsu Synthesized CW Signal Generator with GPIB interface

Rated 4.5/5  |  8 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

Anritsu 69147A Synthesized CW Signal Generator In Stock | Apex Waves | Image
Anritsu 69147A Synthesized CW Signal Generator In Stock | Apex Waves | Image
69147A New
69147A Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the 69147A

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
Check Availability Get Current Lead Time

Anritsu 69147A Synthesized CW Generator

The Anritsu 69147A Synthesized CW Generator has an interface function that is the component of the GPIB framework, which gives the essential operational facility that allows a gadget to receive processes and send messages. Every interface capacity can send or get a limited arrangement of messages inside a given message class. As a result, an interface set’s capacity is important to accomplish complete communication between gadgets in the GPIB. The ANSI/IEEE Std 488.1 characterizes every one of the interface’s capacities together with the user’s specific protocol. The ANSI/IEEE Std 488.2 determines the minimum set of functions of the IEEE 488.1 interface that each GPIB gadget must have. This minimum interface set’s capacities guarantees that the gadget can send and get information, request service, and react to a gadget clear message.

The 69147A CPU programs the coarse-loop oscillator's output recurrence, so one of its sounds will be within 30 to 40 MHz of the desired YIG-tuned oscillator's output recurrence. The YIG Loop phase detector compares the YIG IF signal to the 30 to 40 MHz reference signal from the Fine Loop. If there is a distinction, the YIG phase detector calibrates the YIG-tuned oscillator (by means of the FM hardware and the FM coil drivers) to wipe out any recurrence contrast between the two signals.

The RF output signal from the YIG-tuned oscillator goes to connector J6 on the exchanged filter assembly. In the exchanged filter assembly, the RF signal is amplified and then goes to the modulator. A bit of the RF signal to the modulator is picked off and coupled through connector J5 to the Sampler for use by the YIG loop circuitry. The modulator gives power level control and, in the 69147A, AM and square wave modulation.

69147A Technical Specifications
Model69147A
ManufacturerAnritsu Corporation (Anritsu Kabushiki-gaisha)
Series69XXXA Series
TypeSynthesized CW Generator
Frequency Range0.01 to 20 GHz
Output Power+13 dBm
RF Output ConnectorType K female
69147A ManualUser Manual and Maintenance Manual Available for Download
PriceContact a sales representative for a quote.

Associated part numbers for 69147A:

Delivery:

Free FedEx or UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

T9147A, U9147A, 6914YA, 69147Q, 69147W

Why Buy From Apex Waves:

Video thumbnail for Apex Waves Unboxing Experience Video