Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
E1353A
Keysight/Agilent E1353A, Configurable, 3 Connection Terminals, 16 Channels, T/C FET Multiplexer
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Keysight/Agilent E1353A T/C FET Multiplexer
The Keysight E1353A 16 Channel T/C FET Multiplexer is built for high-speed signal switching in industrial automation. It delivers up to 100,000 connections per second, making it well-suited for demanding automated test systems. The model can be configured to operate as a scanning multiplexer or as a standalone switchbox. Its 16 channels are individually numbered from 00 to 15, enabling clear and systematic channel identification.
Each channel on the E1353A FET Multiplexer provides three dedicated connection terminals for high, low, and guard signals. Only the High and Low signal lines are actively switched during each multiplexing operation cycle. The guard terminal is present on every channel but remains unswitched throughout the entire operation. This architecture ensures precise and reliable signal routing in thermocouple and low-level measurement applications.
The E1353A FET Multiplexer supports a maximum terminal-to-chassis voltage of ± 16 V peak under standard operating conditions. Users should note that the input impedance decreases significantly for all input signals above 14 V peak. The maximum current per channel is limited to 1 mA, and this rating applies to noninductive loads only. The closed channel resistance is rated below 3.1 kΩ for both high and low signal inputs.
The offset voltage on the E1353A FET multiplexer measures 25 μV maximum across the temperature range of 0° to 28°C. Between 28° and 55°C, the maximum offset voltage rises to 250 μV on the same module. The high-to-low input impedance exceeds 10? Ω when the module operates with Vin at or below ± 10 V. The high or low chassis impedance also exceeds 10? Ω under identical power-on voltage conditions.
The T/C FET multiplexer achieves a -3 dB bandwidth greater than 200 kHz under standard measurement termination conditions. This specification is measured using a 50 Ω source terminated into a 1 MΩ parallel 10 pF load. The module features a selectable interrupt level allowing flexible integration with various automated test systems. The model’s supply voltage requirements include both a +5 V and a +12 V rail for full and stable operation.
| Model | E1353A |
|---|---|
| Manufacturer | Keysight/Agilent |
| Part Type | 16-Channel T/C FET Multiplexer |
| DC Maximum Voltage | 16 Vpk (Terminal To Terminal/Chassis) |
| AC RMS Maximum Voltage | 16 Vpk (Terminal To Terminal/Chassis) |
| Maximum Current per Channel | 1 mA (Non-Inductive) |
| Relays Type | FETs Break-Before-Make |
| Power Down State | FETs Open On Power Down |
| Power Up State | FETs Open On Power Up |
Associated part numbers for E1353A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
