Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
8710-1765
Keysight 8710-1765, 5/16" Size, 90 N-cm Adjustable Value, Torque Wrench
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Keysight 8710-1765 Torque Wrench
The Keysight 8710-1765 is a precise torque wrench used to couple connectors with controlled rotational torques. It has an adjustable value of 90 N-cm (8 in-lbs) with an overall size of 5/16" (7.9 mm) between the flats in the coupler nut to fit connectors such as the 2.92 mm standard connectors and 3.5 mm standard connectors. This tool is produced to prevent over- or under-tightening in installation to obtain signal integrity and physical stability in systems with frequencies that are high.
Primarily used in conjunction with Keysight N1055A module N1076A-CR1/N1076B-CR1 clock recovery products, the 8710-1765 is used to secure terminations in systems in Digital Component Analyzers (DCA) systems. It is used especially in relation to 3.5 mm connectors in DCA systems to prevent confusion with torque wrenches used in relation to 3.5 mm NMD connectors used in relation to test ports in analyzers where an additional tool is used. Wrench's 0.9 Nm setting is in accordance with manufacturers recommendations to pair male 3.5 mm or 2.92 mm connectors to female connectors to achieve repeatability while minimizing wear.
The design has an open head with a 5/16" to fit securely over connector wrench flats in an attempt to avoid rotation during assembly. This is required where mating connectors can influence both electrical performance and mechanical alignment by inducing motion relative to each other. Third-party connectors have partial compatibility, whereas this product is optimally functional in working with Agilent connector products because sizes in third-party connectors have discrepancies. Key applications to laboratory equipment setups, communication equipment systems, and process automation equipment in industries where accurate installation of coaxial connectors is required. Calibration setups and tests where stable torque is required to ensure intactness in high-frequency signals are achieved by the 8710-1765. Industry standards in specifications in both 2.92 mm and 3.5 mm interfaces mean this is specialist equipment used by technicians and engineers working with precision instrumentation. Maintaining accurate measurements in torque reduces the potential to damage connectors, reliability in measurements is increased, and equipment performance is ensured in the long term.
| Model | 8710-1765 |
|---|---|
| Part Type | Torque Wrench |
| Coupling Torque | 90 Ncm / 8 in-lbs (equivalent to 0.9 Nm) |
| Wrench Flats Width | 5/16 inch |
| Connector Standard | 2.92 mm (standard) |
| Wrench Head Dimension | 7.9 mm (corresponding to 5/16 inch) |
| Dual Torque Units | Provides both metric and imperial measurements |
| Instrument Compatibility | Designed for Keysight N1055A modules, N1076A-CR1, and N1076B-CR1 clock recovery instruments |
| Designed Connector | Intended for use with DCA 3.5 mm connectors |
| Connector Exclusion | Not suitable for 3.5 mm NMD connectors on network analyzer test ports |
| Manufacturer | Keysight |
Associated part numbers for 8710-1765:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
